MAX1425 Datasheet, PDF (2/16 Pages) Maxim Integrated Products – 10-Bit, 20Msps ADC

10-Bit, 20Msps ADC
ABSOLUTE MAXIMUM RATINGS
AV_DD to AGND ........................................................ -0.3V to +6V
DV_DD to DGND ....................................................... -0.3V to +6V
AV_DD to DGND ........................................................ -0.3V to +6V
DGND to AGND ................................................................. ±0.3V
REFP, REFIN, REFN, CMLN, CMLP,
CML, INP, INN ....................(V_AGND - 0.3V) to (V_AVDD + 0.3V)
CLK, OE/PD, D0–D9 ...............(V_DGND - 0.3V) to (V_DVDD + 0.3V)
Continuous Power Dissipation (T_A = +70°C)
28-Pin SSOP (derated 9.5mW/°C above +70°C) .........762mW
Operating Temperature Ranges
MAX1425CAI ..................................................... 0°C to +70°C
MAX1425EAI................................................... -40°C to +85°C
Junction Temperature ..................................................... +150°C
Storage Temperature Range ............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(V_AVDD = V_CMLP = +5V, V_DVDD = +3.3V, V_CMLN = V_AGND = V_DGND = 0, internal reference, digital output load = 35pF, f_CLK = 20MHz
(50% duty cycle), T_A = T_MIN to T_MAX, unless otherwise noted. Typical values are at T_A = +25°C.)
PARAMETER
SYMBOL
CONDITIONS
ACCURACY
Resolution
RES
Differential Nonlinearity
DNL
Integral Nonlinearity
INL
No Missing Codes
Guaranteed monotonic
Midscale Offset
MSO (Note 1)
Internal reference (Note 1)
Gain Error
External reference (REFIN) (Note 2)
GE
External reference (REFP, CML, REFN)
(Note 3)
Power-Supply Rejection Ratio
PSRR (Note 4)
DYNAMIC PERFORMANCE (V_INP - V_INN = +2V to -2V)
Signal-to-Noise Ratio
SNR
f = 2MHz
f = 10MHz
Spurious-Free Dynamic Range
SFDR
f = 2MHz
f = 10MHz
Total Harmonic Distortion
(first five harmonics)
THD
f = 2MHz
f = 10MHz
Signal-to-Noise and Distortion
SINAD
f = 2MHz
f = 10MHz
Effective Number of Bits
ENOB
f = 2MHz
f = 10MHz
MIN TYP MAX UNITS
10
Bits
-1
1
LSB
-1.5 ±0.3
1.5
LSB
-3
±1.0
-10
±5
-5
±2
-5
±3
-5
±2
3
%FSR
10
5
%FSR
5
5
mV/V
60
61
dB
56
59
70
72
dB
64
69
-70
-67
dB
-69
-64
59
61
dB
55
59
9.3
9.7
Bits
8.8
9.5
Intermodulation Distortion
IMD
f1 = 10.17MHz, f2 = 10.19MHz
(-7dB FS, each tone) (Note 5)
-70
dBc
2 _______________________________________________________________________________________