 English |
|
|
|
|
|
|
|
| MAX13013_0412 Datasheet, PDF (2/18 Pages) Maxim Integrated Products – +1.2V to +3.6V, 0.1μA, 100Mbps, Single-/Dual-/Quad-Level Translators | |||
| |||
| ◁ |
+1.2V to +3.6V, 0.1µA, 100Mbps,
Single-/Dual-/Quad-Level Translators
ABSOLUTE MAXIMUM RATINGS
All voltages are referenced to GND.
VCC ...........................................................................-0.3V to +4V
VL...........................................................................................-0.3V to +4V
I/O VCC_......................................................-0.3V to (VCC + 0.3V)
I/O VL_ ...........................................................-0.3V to (VL + 0.3V)
EN, EN...........................................................-0.3V to (VL + 0.3V)
Short-Circuit Duration I/O VL_,
I/O VCC_ to GND ....................................................Continuous
Continuous Power Dissipation (TA = +70°C)
6-Pin SC70 (derate 3.1mW/°C above +70°C) ..............245mW
6-Bump UCSP (derate 3.9mW/°C above +70°C).........308mW
8-Bump UCSP (derate 4.7mW/°C above +70°C).........379mW
8-Pin SOT23 (derate 9.1mW/°C above +70°C)............727mW
12-Bump UCSP (derate 6.5mW/°C above +70°C) ...518.8mW
14-Pin TSSOP (derate 9.1mW/°C above +70°C) .........727mW
Operating Temperature Range ...........................-40°C to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range ............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under âAbsolute Maximum Ratingsâ may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VCC = +1.65V to +3.6V, VL = +1.2V to (VCC - 0.4V), EN = VL, EN = open (MAX3023 TSSOP package only), CIOVL ⤠15pF, CIOVCC ⤠40pF,
TA = TMIN to TMAX. Typical values are at TA = +25°C.) (Notes 1, 2)
PARAMETER
POWER SUPPLY
VL Supply Range
VCC Supply Range
Supply Current from VCC
SYMBOL
CONDITIONS
VL
VCC
IQVCC
I/O VCC_ = 0, I/O VL_ = 0
or I/O VCC_ = VCC, I/O VL_ = VL
MIN TYP MAX UNITS
1.2
VCC - 0.4
V
1.65
3.60
V
0.1
1
µA
Supply Current from VL
IQVL
I/O VCC_ = 0, I/O VL_ = 0
or I/O VCC_ = VCC, I/O VL_ = VL
I/O VCC_ = 0, I/O VL_ = 0
or I/O VCC_ = VCC, I/O VL_ = VL,
VL < VCC - 0.2V
0.2
2
µA
10
100
VCC Tri-state Output-Mode
Supply Current
VL Tri-state Output-Mode Supply
Current (MAX13013/MAX13014)
ITS-VCC TA = +25°C, EN = 0
ITS-VL
TA = +25°C, EN = 0
TA = +25°C, EN = 0, VL = VCC - 0.2V
0.03
1
µA
0.1
0.2
µA
1
2
VL Tri-state Output-Mode Supply
Current (MAX3023 TSSOP
Package Only)
ITS-VL
TA = +25°C, EN = 0
TA = +25°C, EN = 0, VL = VCC - 0.2V
50
70
µA
55
74
I/O Tri-state Output-Mode
Leakage Current
TA = +25°C, EN = 0
TA = +25°C, EN = 0, VL = VCC - 0.2V
0.15
µA
20
2 _______________________________________________________________________________________
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese