 English |
|
|
|
|
|
|
|
| MAX1110 Datasheet, PDF (2/20 Pages) Maxim Integrated Products – +2.7V, Low-Power, Multichannel, Serial 8-Bit ADCs | |||
| |||
| ◁ |
+2.7V, Low-Power, Multichannel,
Serial 8-Bit ADCs
ABSOLUTE MAXIMUM RATINGS
VDD to AGND ..............................................................-0.3V to 6V
AGND to DGND .......................................................-0.3V to 0.3V
CH0âCH7, COM, REFIN,
REFOUT to AGND ......................................-0.3V to (VDD + 0.3V)
Digital Inputs to DGND ...............................................-0.3V to 6V
Digital Outputs to DGND ............................-0.3V to (VDD + 0.3V)
Continuous Power Dissipation (TA = +70°C)
16 Plastic DIP (derate 10.53mW/°C above +70°C) ......842mW
16 QSOP (derate 8.30mW/°C above +70°C) ................667mW
16 CERDIP (derate 10.00mW/°C above +70°C) ..........800mW
20 Plastic DIP (derate 11.11mW/°C above +70°C) ......889mW
20 SSOP (derate 8.00mW/°C above +70°C) ................640mW
20 CERDIP (derate 11.11mW/°C above +70°C) ..........889mW
Operating Temperature Ranges
MAX1110C_P/MAX1111C_E................................0°C to +70°C
MAX1110E_P/MAX1111E_E .............................-40°C to +85°C
MAX1110MJP/MAX1111MJE..........................-55°C to +125°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10sec) .............................+300°C
Stresses beyond those listed under âAbsolute Maximum Ratingsâ may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VDD = +2.7V to +5.5V; unipolar input mode; COM = 0V; fSCLK = 500kHz, external clock (50% duty cycle); 10 clocks/conversion
cycle (50ksps); 1µF capacitor at REFOUT; TA = TMIN to TMAX; unless otherwise noted.)
PARAMETER
DC ACCURACY
Resolution
Relative Accuracy (Note 1)
Differential Nonlinearity
Offset Error
Gain Error (Note 3)
Gain Temperature Coefficient
Total Unadjusted Error
SYMBOL
CONDITIONS
INL
DNL
TUE
VDD = 2.7V to 3.6V
VDD = 5.5V (Note 2)
No missing codes over temperature
VDD = 2.7V to 3.6V
VDD = 5.5V (Note 2)
Internal or external reference
External reference, 2.048V
MIN TYP MAX UNITS
8
Bits
±0.15 ±0.5
LSB
±0.2
±1
LSB
±0.35 ±1
LSB
±0.5
±1
LSB
±0.8
ppm/°C
±0.3
±1
LSB
Channel-to-Channel
Offset Matching
±0.1
LSB
DYNAMIC SPECIFICATIONS (10.034kHz sine-wave input, 2.048Vp-p, 50ksps, 500kHz external clock)
Signal-to-Noise
and Distortion Ratio
SINAD
49
dB
Total Harmonic Distortion
(up to the 5th harmonic)
THD
-70
dB
Spurious-Free Dynamic Range
Channel-to-Channel Crosstalk
Small-Signal Bandwidth
Full-Power Bandwidth
SFDR
VCH_ = 2.048Vp-p, 25kHz (Note 4)
-3dB rolloff
68
dB
-75
dB
1.5
MHz
800
kHz
2 _______________________________________________________________________________________
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese