 English |
|
|
|
|
|
|
|
| MAX1040_08 Datasheet, PDF (2/39 Pages) Maxim Integrated Products – 10-Bit, Multichannel ADCs/DACs with FIFO, Temperature Sensing, and GPIO Ports | |||
| |||
| ◁ |
10-Bit, Multichannel ADCs/DACs with FIFO,
Temperature Sensing, and GPIO Ports
ABSOLUTE MAXIMUM RATINGS
AVDD to AGND .........................................................-0.3V to +6V
DGND to AGND.....................................................-0.3V to +0.3V
DVDD to AVDD .......................................................-3.0V to +0.3V
Digital Inputs to DGND.............................................-0.3V to +6V
Digital Outputs to DGND .........................-0.3V to (DVDD + 0.3V)
Analog Inputs, Analog Outputs and REF_
to AGND ...............................................-0.3V to (AVDD + 0.3V)
Maximum Current into Any Pin (except AGND, DGND, AVDD,
DVDD, and OUT_) ...........................................................50mA
Maximum Current into OUT_.............................................100mA
Continuous Power Dissipation (TA = +70°C)
36-Pin Thin QFN (6mm x 6mm)
(derate 26.3mW/°C above +70°C) ..........................2105.3mW
Operating Temperature Range ...........................-40°C to +85°C
Storage Temperature Range .............................-60°C to +150°C
Junction Temperature ......................................................+150°C
Lead Temperature (soldering, 10s) .................................+300°C
Note: If the package power dissipation is not exceeded, one output at a time can be shorted to AVDD, DVDD, AGND, or DGND
indefinitely.
Stresses beyond those listed under âAbsolute Maximum Ratingsâ may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(AVDD = DVDD = 4.75V to 5.25V, external reference VREF = 4.096V, fCLK = 3.6MHz (50% duty cycle), TA = -40°C to +85°C, unless
otherwise noted. Typical values are at AVDD = DVDD = 5V, TA = +25°C. Outputs are unloaded, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
ADC
DC ACCURACY (Note 1)
Resolution
10
Integral Nonlinearity
INL
±0.5
Differential Nonlinearity
DNL
±0.5
Offset Error
±0.25
Gain Error
(Note 2)
±0.025
Gain Temperature Coefficient
±1.4
Channel-to-Channel Offset
±0.1
DYNAMIC SPECIFICATIONS (10kHz sine-wave input, VIN = 4.096VP-P, 225ksps, fCLK = 3.6MHz)
Signal-to-Noise Plus Distortion
SINAD
61
MAX
±1.0
±1
±2.0
±2.0
UNITS
Bits
LSB
LSB
LSB
LSB
ppm/°C
LSB
dB
Total Harmonic Distortion
(Up to the Fifth Harmonic)
Spurious-Free Dynamic Range
Intermodulation Distortion
Full-Linear Bandwidth
Full-Power Bandwidth
CONVERSION RATE (Note 3)
THD
SFDR
IMD
fIN1 = 9.9kHz, fIN2 = 10.2kHz
SINAD > 70dB
-3dB point
External reference
-70
dBc
66
dBc
72
dBc
100
kHz
1
MHz
0.8
µs
Power-Up Time
tPU
Internal reference (Note 4)
Conversion
218
clock
cycles
2 _______________________________________________________________________________________
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese