 English |
|
|
|
|
|
|
|
| MAX1027_09 Datasheet, PDF (2/23 Pages) Maxim Integrated Products – 10-Bit 300ksps ADCs with FIFO, Temp Sensor, Internal Reference | |||
| |||
| ◁ |
10-Bit 300ksps ADCs with FIFO,
Temp Sensor, Internal Reference
ABSOLUTE MAXIMUM RATINGS
VDD to GND ..............................................................-0.3V to +6V
CS, SCLK, DIN, EOC, DOUT to GND.........-0.3V to (VDD + 0.3V)
AIN0âAIN13, REF-/AIN_, CNVST/AIN_,
REF+ to GND.........................................-0.3V to (VDD + 0.3V)
Maximum Current into Any Pin............................................50mA
Continuous Power Dissipation (TA = +70°C)
16-Pin QSOP (derate 8.3mW/°C above +70°C)...........667mW
20-Pin QSOP (derate 9.1mW/°C above +70°C)...........727mW
24-Pin QSOP (derate 9.5mW/°C above +70°C)...........762mW
28-Pin TQFN 5mm x 5mm
(derate 20.8mW/°C above +70°C) ........................1667mW
Operating Temperature Ranges
MAX10__C__.......................................................0°C to +70°C
MAX10__E__ ....................................................-40°C to +85°C
Storage Temperature Range .............................-60°C to +150°C
Junction Temperature ......................................................+150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under âAbsolute Maximum Ratingsâ may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VDD = +2.7V to +3.6V, fSAMPLE = 300kHz, fSCLK = 4.8MHz (50% duty cycle), VREF = 2.5V, TA = TMIN to TMAX, unless otherwise
noted. Typical values are at TA = +25°C.)
PARAMETER
SYMBOL
CONDITIONS
MIN
DC ACCURACY (Note 1)
Resolution
RES
10
Integral Nonlinearity
INL
Differential Nonlinearity
DNL No missing codes over temperature
Offset Error
Gain Error
(Note 2)
Offset Error Temperature
Coefficient
Gain Temperature Coefficient
Channel-to-Channel Offset
Matching
DYNAMIC SPECIFICATIONS (10kHz sine wave input, 2.5VP-P, 300ksps, fSCLK = 4.8MHz)
Signal-to-Noise Plus Distortion
SINAD
Total Harmonic Distortion
THD Up to the 5th harmonic
Spurious-Free Dynamic Range
SFDR
Intermodulation Distortion
Full-Power Bandwidth
IMD fin1 = 9.9kHz, fin2 = 10.2kHz
-3dB point
Full-Linear Bandwidth
S / (N + D) > 68dB
TYP
±0.5
±0.5
±2
±0.8
±0.1
70
-82
80
76
1
25
MAX UNITS
±1.0
±1.0
±2.0
±2.0
Bits
LSB
LSB
LSB
LSB
ppm/°C
FSR
ppm/°C
LSB
dB
dBc
dBc
dBc
MHz
kHz
2 _______________________________________________________________________________________
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese