English
Language : 

DS1307 Datasheet, PDF (2/14 Pages) Dallas Semiconductor – 64 X 8 Serial Real Time Clock
DS1307 64 x 8, Serial, I2C Real-Time Clock
ABSOLUTE MAXIMUM RATINGS
Voltage Range on Any Pin Relative to Ground ....................................................................................-0.5V to +7.0V
Operating Temperature Range (Noncondensing)
Commercial................................................................................................................................0°C to +70°C
Industrial ..................................................................................................................................-40°C to +85°C
Storage Temperature Range ............................................................................................................. -55°C to +125°C
Soldering Temperature (DIP, leads) ........................................................................................+260°C for 10 seconds
Soldering Temperature (surface mount)…..……………………….Refer to the JPC/JEDEC J-STD-020 Specification.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only,
and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is
not implied. Exposure to the absolute maximum rating conditions for extended periods may affect device reliability.
RECOMMENDED DC OPERATING CONDITIONS
(TA = 0°C to +70°C, TA = -40°C to +85°C.) (Notes 1, 2)
PARAMETER
SYMBOL
CONDITIONS
Supply Voltage
Logic 1 Input
Logic 0 Input
VBAT Battery Voltage
VCC
VIH
VIL
VBAT
MIN
TYP
MAX UNITS
4.5
5.0
5.5
V
2.2
VCC + 0.3
V
-0.3
+0.8
V
2.0
3
3.5
V
DC ELECTRICAL CHARACTERISTICS
(VCC = 4.5V to 5.5V; TA = 0°C to +70°C, TA = -40°C to +85°C.) (Notes 1, 2)
PARAMETER
SYMBOL
CONDITIONS
MIN
Input Leakage (SCL)
I/O Leakage (SDA, SQW/OUT)
Logic 0 Output (IOL = 5mA)
Active Supply Current
(fSCL = 100kHz)
Standby Current
VBAT Leakage Current
Power-Fail Voltage (VBAT = 3.0V)
ILI
ILO
VOL
ICCA
ICCS
IBATLKG
VPF
(Note 3)
-1
-1
1.216 x
VBAT
TYP
5
1.25 x
VBAT
MAX UNITS
1
μA
1
μA
0.4
V
1.5
mA
200
μA
50
nA
1.284 x
VBAT
V
DC ELECTRICAL CHARACTERISTICS
(VCC = 0V, VBAT = 3.0V; TA = 0°C to +70°C, TA = -40°C to +85°C.) (Notes 1, 2)
PARAMETER
VBAT Current (OSC ON);
SQW/OUT OFF
VBAT Current (OSC ON);
SQW/OUT ON (32kHz)
VBAT Data-Retention Current
(Oscillator Off)
SYMBOL
IBAT1
IBAT2
IBATDR
CONDITIONS
MIN
TYP
MAX UNITS
300
500
nA
480
800
nA
10
100
nA
WARNING: Negative undershoots below -0.3V while the part is in battery-backed mode may cause loss of data.
2 of 14