DG506A_12 Datasheet, PDF (2/10 Pages) Maxim Integrated Products – Monolithic CMOS Analog Multiplexers

Monolithic CMOS Analog Multiplexers
ABSOLUTE MAXIMUM RATINGS
(Voltages referenced to V^-.)
V⁺........................................................................................... 44V
GND........................................................................................ 25V
Digital Inputs VS, VD (Note 1)........................-2V to (V⁺ + 2V) or
20mA, whichever occurs first
Current, Any Terminal Except S or D..................................30mA
Continuous Current, S or D.................................................20mA
Peak Current, S or D (pulsed at 1ms, 10% duty cycle max).... 40mA
Continuous Power Dissipation (TA = +70°C)*
28-Pin Ceramic DIP (derate 16.7mW/NC above +70NC)..1333mW
28-Pin Plastic DIP (derate 14.3mW/NC above +70NC)...1143mW
28-Pin Wide SO (derate 12.5mW/°C above +70°C)..1000mW
28-Pin LCC (derate 10.2mW/°C above +70°C)........816.3mW
Operating Temperature Range (A Suffix)......... -55NC to +125NC
(B Suffix)........... -25NC to +85NC
(C Suffix)................. 0NC to +70N
Storage Temperature (A and B Suffix).............. -65NC to +150NC
(C Suffix)........................ -65NC to +125NC
Lead Temperature (soldering, 10s).................................+300NC
Soldering Temperature (reflow)
Lead (Pb)-free packages.............................................+260NC
Packages containing lead (Pb)....................................+240NC
*All leads soldered or welded to PCB.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(V+ = 15V, V- = -15V, VGND = 0V, TA = +25NC, unless otherwise indicated.)
PARAMETER
SWITCH
Analog Signal
Range
Drain-to-
Source
On-Resistance
Greatest
Change in
Drain-Source
On-Resistance
Between
Channels
SYMBOL
CONDITIONS
DG506AA
DG507AA
DG506AB/C
DG507AB/C
MIN TYP
(Note 2) (Note 3)
MAX
MIN TYP
(Note 2) (Note 3)
MAX
VANALOG
-15
+15 -15
+15
RDS(ON)
Sequence each
switch on,
VAL = 0.8V,
VAH = 2.4V,
VEN = 2.4V
VD = 10V,
IS = -200FA
VD = -10V,
IS = -200FA
270 400
230 400
270 450
230 450
RDS(ON)
∆R_DS(ON)
= ^{ RDS(ON}_R^{)MDASX(O−}_N^R_{)ADVSE(ON)MIN}


6
6
-10V P VS P +10V
UNITS
V
I
%
Source Off-
Leakage
Current
Drain Off-
Leakage
Current
IS(OFF)
VEN = 0.8V,
VAL = 0.8V
ID(OFF)
DG506A,
VEN = 0.8V,
VAL = 0.8V
DG507A,
VEN = 0.8V,
VAL = 0.8V
VS = 10V,
VD = -10V
-1 0.002 +1
-5 0.002 +5
nA
VS = -10V,
VD = 10V
-1 -0.005 +1
-5 -0.005 +5
VD = 10V,
VS = -10V
-10 0.02 +10 -20 0.02 +20
VD = -10V,
VS = 10V
-10 -0.03 +10 -20 -0.03 +20
nA
VD = 10V,
VS = -10V
-5 0.007 +5
-10 0.007 +10
VD = -10V,
VS = 10V
-5 -0.015 +5
-10 -0.015 +10
2