DG308A Datasheet, PDF (2/4 Pages) Intersil Corporation – Quad Monolithic SPST, CMOS Analog Switch

Quad, SPST Analog Switches
ABSOLUTE MAXIMUM RATINGS
Voltage Referenced to V-
V+ ....................................................................................+44V
GND .................................................................................+25V
Digital Inputs VS, VD................(V- - 2V) to (V+ + 2V) or 20mA,
whichever occurs first
Current into Any Terminal (except S or D) ..........................30mA
Continuous Current (S or D)................................................20mA
Peak Current (S or D)
(pulsed at 1ms, 10% duty cycle max) ............................70mA
Continuous Power Dissipation (TA = +70°C) (Note 1)
Plastic DIP (derate 10.53mW/°C above +70°C)............842mW
Narrow SO (derate 8.70mW/°C above +70°C) .............696mW
CERDIP (derate 10.00mW/°C above +70°C) ................800mW
Operating Temperature Ranges
DG308AC_/DG309C_ .........................................0°C to +70°C
DG308AD_/DG309D_ ......................................-40°C to +85°C
DG308AAK/DG309AK ...................................-55°C to +125°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10sec) .............................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(V+ = 15V, V- = -15V, TA = TMIN to TMAX, unless otherwise noted.) (Note 2)
PARAMETER SYMBOL
CONDITIONS
SWITCH
Analog Signal Range VANALOG
Drain-Source
On-Resistance
rDS(ON)
VIN = 11V (DG308A),
V_IN = 3.5V (DG309),
IS = 1mA,
VD = 10V or -10V
Source-Off
Leakage Current
IS(OFF)
VIN = 3.5V (DG308A),
VIN = 11V (DG309),
VS = 14V, VD = -14V
VIN = 3.5V (DG308A),
V_IN = 11V (DG309),
VS = -14V, VD = 14V
Drain-Off
Leakage Current
ID(OFF)
VIN = 3.5V (DG308A),
V_IN = 11V (DG309),
VS = 14V, VD = -14V
VIN = 3.5V (DG308A),
VIN = 11V (DG309),
VS = -14V, VD = 14V
Drain-On
Leakage Current
ID(ON)
VIN =11V (DG308A),
VIN = 3.5V (DG309),
VS = VD = +14V
VIN = 11V (DG308A),
VIN = 3.5V (DG309),
VS = VD = -14V
INPUT
Input Current with
Input Voltage High
IINH VIN = 15V
Input Current with
Input Voltage Low
IINL VIN = 0V
TA = +25°C
TA = +25°C,
T_MIN
TA = TMAX
TA = +25°C
TA = TMAX
TA = +25°C
TA = TMAX
TA = +25°C
TA = TMAX
TA = +25°C
TA = TMAX
TA = +25°C
TA = TMAX
TA = +25°C
TA = TMAX
TA = +25°C,
TMAX
TA = +25°C,
TMAX
DG30_AK
MIN TYP MAX
-15
15
60 100
95 150
-1 0.1 1
-100
100
-1 -0.1 1
-100
100
-1 0.1 1
-100
100
-1 0.1 1
-100
100
-2 0.1 2
-200
200
-2 0.1 2
-200
200
-1 0.001 1
-1 -0.001 1
DG30_C/D
MIN TYP MAX
UNITS
-15
15
V
60 100
Ω
80 125
-5 0.1 5
-100
100
nA
-5 0.1 5
-100
100
-5 0.1 5
-100
100
nA
-5 0.1 5
-100
100
-5 0.1 5
-200
200
nA
-5 0.1 5
-200
200
-1 0.001 1
µA
-1 0.001 1
µA
2 _______________________________________________________________________________________