71M6601-IL Datasheet, PDF (16/19 Pages) Maxim Integrated Products – Isolated Sensor ICs

71M6xxx Data Sheet
4.6 Package Outline Drawing
Controlling dimensions are in mm.
9
5.99
+0.21
-0.05
10
2.465
1.97
COO
TOP VIEW
1.27 BSC
0.41
+0.08
-0.06
BOTTOM VIEW
1.47
+0.08
-0.07
SEE
DETAIL A
0.33
±0.08
x 45°
4.93 -0.13
+0.05
4
SIDE VIEW
1.63 +0.10 -0.08
3
0.15
+0.1 -
0.023
SEATING
PLANE
8
3.94 4
+0.05
-0.13
END VIEW
0.20
+0.05
-0.01
PARTING
LINE
5°
+3°
-5°
DETAIL A
0.64
+0.25 ⁵
-0.23
NOTES:
3 REFERENCE DATUM
4 ^{LENGTH AND WIDTH ARE REFERENCE DATUMS AND DO NOT}
INCLUDE MOLD FLASH OR PROTRUSIONS, BUT INCLUDE MOLD
MISMATCH. MEASURED AT THE MOLD PARTING LINE.
PROTRUSIONS DO NOT EXCEED 0.1524 mm AT END AND 0.254
mm AT WINDOW.
5 LENGTH OF TERMINAL FOR SOLDERING TO SUBSTRATE
8 ^{FORMED LEADS ARE PLANAR WITH RESPECT TO EACH OTHER}
WITHIN 0.735 mm AT SEATING PLANE.
9 THE APPEARANCE OF PIN #1 I.D. IS OPTIONAL.
10 COUNTRY OF ORIGIN LOCATION ON PACKAGE BOTTOM IS
OPTIONAL AND DEPENDS ON ASSEMBLY LOCATION.
PACKAGE IS COMPLIANT WITH JEDEC STANDARD MS-012.
DIMENSIONING AND TOLERANCES PER ANSI Y14.5 M - 1982
Figure 8: SOIC-8 Package Outline
16