MAX1169 Datasheet, PDF (12/20 Pages) Maxim Integrated Products – 58.6ksps, 16-Bit, 2-Wire Serial ADC in a 14-Pin TSSOP

58.6ksps, 16-Bit, 2-Wire Serial ADC
in a 14-Pin TSSOP
CONTROL
LOGIC
AV_DD ⁸
AGND ⁹
AIN ¹⁰
11
T/H
AGNDS
+4.096V
5kΩ
REFERENCE
REFADJ ¹²
13
REF
Figure 3. MAX1169 Simplified Functional Diagram
4MHz
INTERNAL
OSCILLATOR
6 _ADD0
5 _ADD1
4 _ADD2
14 _ADD3
3 _SDA
2 _SCL
7 _DVDD
1 _DGND
CLOCK
IN
SAR
ADC
OUT
REF
A_V = 1.0
OUTPUT SHIFT
REGISTER
MAX1169
5.0V
0.1μF
10μF
0.1μF
8 _{AVDDMAX1169 DVDD 7}
ADD0 ⁶
ADD1 ⁵
13 _REF
ADD2 ⁴
12 _REFADJ
SDA ³
SCL ²
3.0V
0.1μF
R_P
μC
V_DD
R_P
SDA
SCL
ANALOG 10 _AIN
SOURCE
11 _AGNDS
ADD3 ¹⁴
V_SS
AGND DGND
9
1
I²C ADDRESS IS 0110111.
Figure 4. Typical Application Circuit
The time required for the T/H to acquire an input signal
is a function of the analog input source impedance. If
the input signal source impedance is high, lengthen the
acquisition time by reducing f_SCL. The MAX1169 pro-
vides two SCL cycles (t_ACQ) in which the track-and-
hold capacitance must acquire a charge representing
the input signal. Minimize the input source impedance
(R_SOURCE) to allow the track-and-hold capacitance to
charge within the allotted time. R_SOURCE should be
less than 11.3kΩ for f_SCL = 400kHz and less than 2kΩ
for f_SCL = 1.7MHz. R_SOURCE is calculated with the fol-
lowing equation:
R _SOURCE
≤
f_SCL
2
× In(2 × 2^N) ×
C_IN
− R_IN
12 ______________________________________________________________________________________