MAX16903_13 Datasheet, PDF (11/14 Pages) Maxim Integrated Products – 2.1MHz, High-Voltage, 1A Mini-Buck Converter

MAX16903
2.1MHz, High-Voltage, 1A Mini-Buck Converter
per pad for efficient heat transfer. Connect the
exposed pad to PGND ideally at the return terminal
of the output capacitor.
3) Isolate the power components and high current
paths from sensitive analog circuitry.
4) Keep the high current paths short especially at the
ground terminals. The practice is essential for stable
jitter-free operation.
5) Connect the PGND and GND together preferably at
the return terminal of the output capacitor. Do not
connect them anywhere else.
6) Keep the power traces and load connections short.
This practice is essential for high efficiency. Use
thick copper PCB to enhance full load efficiency and
power dissipation capability.
7) Route high-speed switching nodes away from sensi-
tive analog areas. Use internal PCB layers as PGND
to act as EMI shields to keep radiated noise away
from the device and analog bypass capacitor.
ESD Protection
The ESD tolerance for the MAX16903 is rated for Human
Body Model and Machine Model. The Human Body
Model discharge components are C_S = 100pF and R_D
= 1.5kΩ (Figure 1). The Machine Model discharge com-
ponents are C_S = 200pF and R_D = 0Ω (Figure 2).
R_D
1MΩ
1.5kΩ
HIGH-
VOLTAGE
DC
SOURCE
CHARGE-CURRENT-
LIMIT RESISTOR
C_S
100pF
DISCHARGE
RESISTANCE
STORAGE
CAPACITOR
Figure 1. Human Body ESD Test Circuit
R_D
0Ω
HIGH-
VOLTAGE
DC
SOURCE
CHARGE-CURRENT-
LIMIT RESISTOR
C_S
200pF
DISCHARGE
RESISTANCE
STORAGE
CAPACITOR
Figure 2. Machine Model ESD Test Circuit
DEVICE
UNDER
TEST
DEVICE
UNDER
TEST
Maxim Integrated
11