MAX11040K_12 Datasheet, PDF (10/32 Pages) Maxim Integrated Products – MAX11040K Evaluation Kit/Daughterboard

MAX11040K Evaluation Kit/Daughterboard
Table 2. Jumper Settings (Daughterboard) (continued)
JUMPER
JU5
JU6
JU7
SHUNT
POSITION
1-2
Open*
1-2
Open*
1-2
Open*
DESCRIPTION
WHEN TO USE THIS OPTION
Connects the AIN0- pin of the IC (U1) to the
AGND pin for single-ended input signal
measurement
When the user wishes to make a single-ended
signal measurement on AIN0+/AIN0-
Disconnects the AIN0- pin of the IC (U1) from
the AGND pin
When the user wishes to make a differential
signal measurement on AIN0+/AIN0-
Connects the AIN1- pin of the IC (U1) to the
AGND pin for single-ended input signal
measurement
When the user wishes to make a single-ended
signal measurement on AIN1+/AIN1-
Disconnects the AIN1- pin of the IC (U1) from
the AGND
When the user wishes to make a differential
signal measurement on AIN1+/AIN1-
Connects the DRDYOUT pin of the IC (U1) to the When the user wishes to have the SYNC pin
SYNC signal (GP5) of the controller
driven by DRDYOUT
Disconnects the DRDYOUT pin of the IC (U1)
from the SYNC signal (GP5) of the controller
When the user wishes to have the SYNC pin
driven by the controller
JU11
Connects the CLKOUT pin of the IC (U1) to the
1-2
CO_CLKOUT on the J2 connector
When the user wishes to carry the CLKOUT of
Note: CO_CLKOUT carries the CLKOUT signal U1 to the next cascaded board
to the next cascaded daughterboard
2-3*
Connects the CI_XIN pin on the J1 connector to
the CO_CLKOUT pin on the J2 connector
Note: CI_XIN carries the CLKOUT signal from
When the user wishes to carry the frequency
from the previous cascaded board to the next
cascaded board
the previous cascaded board
*Default position.
10 ______________________________________________________________________________________