MXL1013 Datasheet, PDF (1/8 Pages) Maxim Integrated Products – Dual/Quad Precision Op Amps

19-0133; Rev. 3; 4/98
Dual/Quad Precision Op Amps
General Description
The Maxim MXL1013 is a precision dual op amp that
upgrades the performance of popular devices such as the
MC1458/MC1558, LM158 and OP221. The Maxim
MXL1014 is a precision quad op amp that directly
upgrades designs in the industry-standard 14-pin DIP
configuration and has specifications similar to the
LT1013. The MXL1013 and MXL1014 are pin compati-
ble with industry standards such as the LT1013 and
LT1014.
Precision specifications include: 40µV offset voltage,
0.3µV/°C drift (TCV_OS), 117dB CMRR, and 120dB PSRR.
While supply current is typically only 350µA per amplifier,
the outputs can source and sink more than 20mA.
Both the MXL1013 and the MXL1014 can be operated
from a single +5V power supply. The input voltage
range includes ground and the outputs swing to within
a few millivolts of ground.
________________________Applications
Battery-Powered Precision Instrumentation
Strain-Gauge Signal Conditioners
Thermocouple Amplifiers
Instrumentation Amplifiers
4mA to 20mA Current-Loop Transmitters
Multiple-Limit Threshold Detection
Active Filters
Multiple Gain Blocks
____________________________Features
o Single-Supply Operation
Input Voltage Range Extends to Ground
Output Swings to Ground while Sinking Current
o 150µV Max Offset Voltage
o Low Drift: 2µV/°C Max
o 0.8nA Max Offset Current
o Guaranteed High Gain
5mA Load Current: 1.5 Million Min
17mA Load Current: 0.8 Million Min
o 500µA Max Supply Current per Amplifier
o Low Voltage Noise: 0.1Hz to 10Hz, 0.55µV_p-p
o Lower Current Noise than OP07: 0.07 pA/√Hz
Ordering Information
PART
MXL1013CN8
MXL1013DN8
MXL1013DS8
MXL1013DC/D
MXL1013IN8
MXL1013IS8
MXL1013AMJ8
MXL1013MJ8
TEMP. RANGE
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
-55°C to +125°C
-55°C to +125°C
PIN-PACKAGE
8 Plastic DIP
8 Plastic DIP
8 SO
Dice*
8 Plastic DIP
8 SO
8 CERDIP**
8 CERDIP**
Ordering Information continued on last page.
* Dice are specified at T_A = +25°C, D.C. parameters only.
**Contact factory for availability and processing to MIL-STD-883.
Pin Configurations
INA+ ¹
V- 2
INB+ 3
INB- 4
MXL1013
A
B
8 _INA-
7 OUTA
6 V+
5 OUTB
SO
NOTE: SO PIN CONFIGURATION DIFFERS
FROM DIP.
TOP VIEW
OUTA+ ¹
INA- 2
INA+ 3
V- 4
MXL1013 ^{8 V+}
7 OUTB
A
6 INB-
B
5 INB+
DIP
Pin Configurations continued on last page.
OUTA 1
INA- 2
INA+ 3
V+ 4
INB+ ⁵
INB- 6
OUTB 7
N.C. 8
A
D
MXL1014
B
C
Wide SO
16 OUTD
15 IND-
14 IND+
13 V-
12 INC+
11 INC-
10 OUTC
9 N.C.
_________________________________________________________________ Maxim Integrated Products 1
For free samples & the latest literature: http://www.maxim-ic.com, or phone [phone].
For small orders, phone [phone].