MXD1013 Datasheet, PDF (1/6 Pages) Maxim Integrated Products – 3-in-1 Silicon Delay Line

19-0394; Rev 0; 12/97
3-in-1 Silicon Delay Line
_______________General Description
The MXD1013 contains three independent, monolithic,
logic-buffered delay lines with delays ranging from
10ns to 200ns. Nominal accuracy is ±2ns for a 10ns to
60ns delay, ±3% for a 70ns to 100ns delay, and ±5%
for a 150ns to 200ns delay. Relative to hybrid solutions,
these devices offer enhanced performance and higher
reliability, and reduce overall cost. Each output can
drive up to ten standard 74LS loads.
The MXD1013 is available in multiple versions, each
offering a different combination of delay times. It comes
in the space-saving 8-pin µMAX package, as well as a
standard 8-pin SO and DIP. It is also offered in indus-
try-standard 16-pin SO and 14-pin DIP packaging,
allowing full compatibility with the DS1013 and other
delay-line products.
________________________Applications
Clock Synchronization
Digital Systems
_________________Pin Configurations
TOP VIEW
IN1 1
IN2 2
IN3 3
GND 4
MXD1013
8 V_CC
7 OUT1
6 OUT2
5 OUT3
DIP/SO/µMAX
IN 1
N.C. 2
IN2 3
N.C. 4
IN3 5
N.C. 6
GND 7
MXD1013
14 V_CC
13 N.C.
12 OUT1
11 N.C.
10 OUT2
9 N.C.
8 OUT3
____________________________Features
o Improved Second Source to DS1013
o Available in Space-Saving 8-Pin µMAX Package
o 20mA Supply Current (vs. Dallas’ 40mA)
o Low Cost
o Three Separate Buffered Delays
o Delay Tolerance of ±2ns for MXD1013_ _ 010
through MXD1013_ _ 060
o TTL/CMOS-Compatible Logic
o Leading- and Trailing-Edge Accuracy
o Custom Delays Available
______________Ordering Information
PART
MXD1013C/D_ _ _
MXD1013PA_ _ _
MXD1013PD_ _ _
MXD1013SA_ _ _
MXD1013SE_ _ _
MXD1013UA_ _ _
TEMP. RANGE
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
PIN-PACKAGE
Dice*
8 Plastic DIP
14 Plastic DIP
8 SO
16 Narrow SO
8 µMAX
*Dice are tested at T_A = +25°C.
Note: To complete the ordering information, fill in the blank with
the part number extension from the Part Numbers and Delay
Times table to indicate the desired delay per output.
___Part Numbers and Delay Times
PART NUMBER
EXTENSION
(MXD1013_ _ _ )
010
012
015
020
025
030
035
040
045
OUTPUT
DELAY
(ns)
10
12
15
20
25
30
35
40
45
PART NUMBER
EXTENSION
(MXD1013_ _ _ )
050
060
070
075
080
090
100
150
200
OUTPUT
DELAY
(ns)
50
60
70
75
80
90
100
150
200
DIP
Pin Configurations continued at end of data sheet.
Functional Diagram appears at end of data sheet.
________________________________________________________________ Maxim Integrated Products 1
For free samples & the latest literature: http://www.maxim-ic.com, or phone [phone].
For small orders, phone [phone] ext. 3468.