MC14584B Datasheet, PDF (1/5 Pages) ON Semiconductor – Hex Schmitt Trigger

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Hex Schmitt Trigger
The MC14584B Hex Schmitt Trigger is constructed with MOS P–channel
and N–channel enhancement mode devices in a single monolithic structure.
These devices find primary use where low power dissipation and/or high
noise immunity is desired. The MC14584B may be used in place of the
MC14069UB hex inverter for enhanced noise immunity to “square up” slowly
changing waveforms.
• Supply Voltage Range = 3.0 Vdc to 18 Vdc
• Capable of Driving Two Low–power TTL Loads or One Low–power
Schottky TTL Load over the Rated Temperature Range
• Double Diode Protection on All Inputs
• Can Be Used to Replace MC14069UB
• For Greater Hysteresis, Use MC14106B which is Pin–for–Pin
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{Replacement for CD40106B and MM74Cl4}
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{MAXIMUM RATINGS* (Voltages Referenced to VSS)}
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _Symbol
Parameter
Value
Unit
VDD DC Supply Voltage
– 0.5 to + 18.0
V
Vin, Vout Input or Output Voltage (DC or Transient) – 0.5 to VDD + 0.5 V
Iin, Iout Input or Output Current (DC or Transient),
± 10
mA
per Pin
PD Power Dissipation, per Package†
500
mW
Tstg Storage Temperature
– 65 to + 150
_C
TL
Lead Temperature (8–Second Soldering)
260
_C
* Maximum Ratings are those values beyond which damage to the device may occur.
†Temperature Derating:
Plastic “P and D/DW” Packages: – 7.0 mW/_C From 65_C To 125_C
Ceramic “L” Packages: – 12 mW/_C From 100_C To 125_C
EQIVALENT CIRCUIT SCHEMATIC
(1/6 OF CIRCUIT SHOWN)
This device contains protection circuitry to guard against damage
due to high static voltages or electric fields. However, precautions must
be taken to avoid applications of any voltage higher than maximum rated
voltages to this high-impedance circuit. For proper operation, Vin and
Vout should be constrained to the range VSS ≤ (Vin or Vout) ≤ VDD.
Unused inputs must always be tied to an appropriate logic voltage
level (e.g., either VSS or VDD). Unused outputs must be left open.
MC14584B
L SUFFIX
CERAMIC
CASE 632
P SUFFIX
PLASTIC
CASE 646
D SUFFIX
SOIC
CASE 751A
ORDERING INFORMATION
MC14XXXBCP
MC14XXXBCL
MC14XXXBD
Plastic
Ceramic
SOIC
TA = – 55° to 125°C for all packages.
LOGIC DIAGRAM
1
2
3
4
5
6
9
8
11
10
13
12
VDD = PIN 14
VSS = PIN 7
REV 3
1/94
©MMOotoTrOolaR, IOncL. A199C5MOS LOGIC DATA
MC14584B
1