|
MAXQ615 Datasheet, PDF (1/20 Pages) Maxim Integrated Products – 16-Bit MAXQ Microcontroller with Hardware Multiplier | |||
|
19-6254; Rev 0; 3/12
MAXQ615
16-Bit MAXQ Microcontroller with
Hardware Multiplier
General Description
The MAXQ615 is a low-power, 16-bit MAXQM microcon-
troller designed for low-power applications. The device
combines a powerful 16-bit RISC microcontroller and
integrated peripherals including multiple high-speed
serial communication interfaces and flexible port I/O.
High-speed communication interfaces include dual SPI
and I2C. The device also provides three instances of the
16-bit timer B peripheral. A 16 x 16 hardware multiply/
accumulate with 48-bit accumulator provides support
for computationally intensive applications. The device
provides 48KB of flash memory and 2KB of data SRAM.
For the ultimate in low-power performance, the device
includes an ultra-low-power stop mode (0.2FA typ). In
this mode, the minimum amount of circuitry is powered.
Wake-up sources include external interrupts, the power-
fail interrupt, and a timer interrupt. The microcontroller
runs from a single 2.4V to 3.6V power-supply operating
voltage.
Applications
Portable Computing
Battery-Powered Portable Equipment
Consumer Electronics
Home Appliances
White Goods
Features
S Core Functionality
ï² High-Performance, Low-Power 16-Bit MAXQ20S
RISC Core
ï² DC to 20MHz Operation Across Entire
Operating Range
ï² 2.4V to 3.6V Operating Voltage
ï² Three Independent Data Pointers Accelerate
Data Movement with Automatic Inc/Dec
ï² Dedicated Pointer for Direct Read from Code
Space
ï² 16-Bit Instruction Word, 16-Bit Data Bus
ï² 16 x 16-Bit General-Purpose Working Registers
ï² Optimized for C Compiler
S Memory
ï² 48KB Flash Memory
1KB Page Sectors
20,000 Erase/Write Cycles per Sector
ï² 2KB Data SRAM
ï² Masked ROM Available
S I/O and Peripherals
ï² Power-Fail Warning
ï² Power-On Reset/Brownout Reset
ï² Three 16-Bit Programmable Timers/Counters
with Prescaler
ï² Programmable Watchdog Timer
ï² Internal 20MHz Clock ±5%
ï² Dual SPI Ports with 16-Byte FIFO
ï² I2C Communication Port
ï² Up to 12 General-Purpose I/O Pins
S Low Power Consumption
ï² 0.2µA (typ) in Stop Mode
ï² 2.6mA (typ) at 20MHz
ï² Divided System Clock Modes Available
Ordering Information appears at end of data sheet.
For related parts and recommended products to use with this part,
refer to www.maxim-ic.com/MAXQ615.related.
MAXQ is a registered trademark of Maxim Integrated Products, Inc.
Note: Some revisions of this device may incorporate deviations from published specifications known as errata. Multiple revisions of any device may
be simultaneously available through various sales channels. For information about device errata, go to: www.maxim-ic.com/errata.
����������������������������������������������������������������� Maxim Integrated Productsââ1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maximâs website at www.maxim-ic.com.
|
▷ |