MAXQ2000_05 Datasheet, PDF (1/15 Pages) Maxim Integrated Products – Evaluation Kit

Rev 2; 7/05
MAXQ2000 Evaluation Kit
General Description
The MAXQ2000 evaluation kit (EV kit) is a proven plat-
form to conveniently evaluate the capabilities of the
MAXQ2000 low-power LCD microcontroller. The kit con-
tains the MAXQ2000 with pins brought out to headers, a
JTAG programming interface, fixed and adjustable
power supplies, a DB-9 serial connector, an LCD dis-
play, and switches and LEDs to control and display
board operation. With the included software, serial-to-
JTAG interface board, and an RS-232 cable connected
to a personal computer, the kit provides a completely
functional system ideal for evaluating the capabilities of
the MAXQ2000.
Evaluation Kit Contents
♦ MAXQ2000 Evaluation Kit Board with Processor
and 13.5MHz Crystal Installed
♦ Serial-to-JTAG Interface Board and JTAG Cable
♦ MAXQ2000 LCD Display Daughterboard
♦ MAXQ2000 Evaluation Kit CD-ROM
Ordering Information
PART
MAXQ2000-KIT
DESCRIPTION
MAXQ2000 EV Kit Board
MAXQ is a registered trademark of Maxim Integrated Products, Inc.
1-Wire is a registered trademark of Dallas Semiconductor Corp.
SPI is a trademark of Motorola, Inc.
Features
♦ Easily Loads Code Using Bootstrap Loader and
Serial-to-JTAG Interface Board
♦ JTAG Interface Provides In-Application
Debugging Features
Step-by-Step Execution Tracing
Breakpointing by Code Address, Data Memory
Address, or Register Access
Data Memory View and Edit
♦ Removable, Static, 4-1/2 Digit LCD Display
♦ DB-9 RS-232 Serial Connector and Level
Translator
♦ On-Board 3.6V, 2.5V and Adjustable 1.8V to 3.6V
Power-Supply Regulators
♦ Evaluation Kit Board can be Powered Directly
over JTAG Interface
♦ Processor Clock can be run from Crystal or
Programmable Oscillator
♦ Serial EEPROM
♦ DS2433 1-Wire^® EEPROM Demonstrates Use of
1-Wire Interface
♦ MAX1407 ADC/DAC Demonstrates Use of SPI™
Interface
♦ Optional LED Display of Port 0 Logic Levels
♦ Pushbutton Switches for Reset and Interrupt
Generation
♦ 32kHz Crystal for Real-Time Clock Oscillator Use
♦ Prototyping Area Including V_DDIO and V_DD Voltage
Rails
♦ Test/Expansion Header Includes All Device GPIO
and LCD Pins
♦ Configuration DIP Switches Connect/Disconnect
All Demonstration Circuitry from Port Pins
♦ Board Schematics Provide a Convenient
Reference Design
______________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.