MAXM17505 Datasheet, PDF (1/19 Pages) Maxim Integrated Products – Offers Flexibility for Power-Design Optimization

MAXM17505
EVALUATION KIT AVAILABLE
4.5V to 60V, 1.7A High-Efficiency, DC-DC Step-
Down Power Module with Integrated Inductor
General Description
The Himalaya series of voltage regulator ICs and power
modules enable cooler, smaller, and simpler power supply
solutions. The MAXM17505 is an easy-to-use, step-down
power module that combines a switching power supply
controller, dual n-channel MOSFET power switches, fully
shielded inductor, and the compensation components in
a low-profile, thermally-efficient, system-in-package (SiP).
The device operates over a wide input voltage range of
4.5V to 60V and delivers up to 1.7A continuous output
current with excellent line and load regulation over an output
voltage range of 0.9V to 12V. The device only requires five
external components to complete the total power solution.
The high level of integration significantly reduces design
complexity, manufacturing risks, and offers a true plug-
and-play power supply solution, reducing time-to-market.
The device can be operated in the pulse-width modu-
lation (PWM), pulse-frequency modulation (PFM), or
discontinuous conduction mode (DCM) control schemes.
The MAXM17505 is available in a low-profile, highly
thermal-emissive, compact, 29-pin 9mm x 15mm x
2.8mm SiP package that reduces power dissipation in
the package and enhances efficiency. The package is
easily soldered onto a printed circuit board and suitable
for automated circuit board assembly. The device can
operate over the industrial temperature range from -40°C
to +125°C.
Applications
●● Industrial Power Supplies
●● Distributed Supply Regulation
●● FPGA and DSP Point-of-Load Regulator
●● Base Station Point-of-Load Regulator
●● HVAC and Building Control
Features and Benefits
●● Reduces Design Complexity, Manufacturing Risks,
and Time-to-Market
• Integrated Switching Power Supply Controller and
Dual-MOSFET Power Switches
• Integrated Inductor
• Integrated Compensation Components
• Integrated Thermal-Fault Protection
• Integrated Peak Current Limit
●● Saves Board Space in Space-Constrained
Applications
• Complete Integrated Step-Down Power Supply in a
Single Package
• Small Profile 9mm x 15mm x 2.8mm SiP Package
• Simplified PCB Design with Minimal External BOM
Components
●● Offers Flexibility for Power-Design Optimization
• Wide Input Voltage Range from 4.5V to 60V
• Output-Voltage Adjustable Range from 0.9V to 12V
• Adjustable Frequency with External Frequency
Synchronization (100kHz to 1.8MHz)
• Soft-Start Programmable
• Autoswitch PWM, PFM, or DCM Current-Mode
Control
• Optional Programmable EN/UVLO
Ordering Information appears at end of data sheet.
Typical Application Circuit
4.5V TO 60V
VIN
CIN
VCC
OPTIONAL
CSS
EN
IN
SYNC
MODE
VCC
RESET
MAXM17505
SS
RT
OUT
OUT
OUT
OUT
OUT
OUT
OUT
EP3
CF
EP1
FB
SGND
PGND
PGND
RT
VOUT
3.3V, 3.5A
COUT
RU
RB
19-7443; Rev 1; 4/15