|
MAX98372 Datasheet, PDF (1/91 Pages) Maxim Integrated Products – Digital Input Class D Amplifier with DHT and Brownout Protection | |||
|
MAX98372
EVALUATION KIT AVAILABLE
Digital Input Class D Amplifier
with DHT and Brownout Protection
General Description
The MAX98372 is a high-efficiency, mono Class D audio
amplifier featuring dynamic headroom tracking (DHT)
and brownout protection. DHT automatically optimizes
the headroom available to the Class D amplifier as the
power supply voltage varies, due to sudden transients
and declining battery life to maintain a consistent listening
experience. A wide 5.5V to 18V supply range allows the
device to reach 19W into an 8⦠load.
The MAX98372âs flexible digital audio interface (DAI)
supports I2S, left-justified, and TDM formats. The digital
audio interface accepts 32kHz, 44.1kHz, 48kHz, 88.2kHz,
and 96kHz sample rates with 16-/24-/32-bit data sup-
ported for all data formats. In TDM mode, the device can
support up to 16 channels of audio data. A unique clock-
ing structure eliminates the need for an external MCLK
signal that is typically needed for PCM communication.
This reduces pin count and simplifies board layout.
Active emissions limiting with edge rate control minimizes
EMI and eliminates the need for output filtering found in
traditional Class D devices.
An 8-bit PVDD supply voltage ADC enables the dynamic
headroom tracking circuit. DHT optimizes audio program
peak behavior as the supply voltage varies and provides
flexible user-defined parameters.
Thermal foldback protection ensures robust behavior
when the thermal limits of the device are exercised. The
circuit can be enabled to automatically reduce the output
power above a user specified temperature. This allows for
uninterrupted music playback even at high ambient tem-
peratures. Traditional thermal protection is also available
in addition to robust overcurrent protection.
All MAX98372 control is performed using a standard
2-wire, I2C interface. One of sixteen slave addresses can
be selected through two, four-level address pins. The IC
is available in a 0.4mm pitch, 30-bump WLP package. It is
specified over the extended, -40°C to +85°C temperature
range.
Applications
ââ Tablets
ââ Notebook Computers
ââ Soundbars
Benefits and Features
ââ Wide Supply Range (5.5V to 18V)
ââ Dynamic Headroom Tracking Maintains a Consistent
Listening Experience
ââ Integrated Thermal Foldback Allows Robust
Operation in a WLP Package
ââ Remote Output Sensing Allows Up to 20dB THD+N
Improvement When Ferrites Are Used
ââ Class D Edge Rate Control Enables Filterless
Operation
ââ 110dB A-Weighted Dynamic Range
ââ Output Power at 1% THD+N:
⢠15.7W into 8Ω, VPVDD = 17V
⢠13.2W into 4Ω, VPVDD = 12V
ââ Output Power at 10% THD+N
⢠19W into 8Ω, VPVDD = 17V
⢠15.8W into 4Ω, VPVDD = 12V
ââ Speaker Amplifier Efficiency
⢠91% at 10W into 8Ω, VPVDD = 12V
⢠81% at 15W into 4Ω, VPVDD = 12V
ââ ALC Provides Battery Brownout Protection
ââ Extensive Click-and-Pop Suppression
ââ Space Saving, 30-Bump WLP Package
(2.2mm x 2.8mm x 0.6mm, 0.4mm Pitch)
Simplified Block Diagram
DVDD
PVDD
MAX98372
I2C
DHT
THERMAL
FOLDBACK
ALC
D
V
O
DAC
L
P
G CLASS D
A
Ordering Information appears at end of data sheet.
19-7734; Rev 1; 1/16
|
▷ |