MAX9718 Datasheet, PDF (1/23 Pages) Maxim Integrated Products – Low-Cost, Mono/Stereo,1.4W Differential Audio Power Amplifiers

19-3050; Rev 0; 10/03
Low-Cost, Mono/Stereo,
1.4W Differential Audio Power Amplifiers
General Description
The MAX9718/MAX9719 differential input audio power
amplifiers are ideal for portable audio devices with
internal speakers. The differential input structure
improves noise rejection and provides common-mode
rejection. A bridge-tied load (BTL) architecture mini-
mizes external component count, while providing high-
quality, power audio amplification. The MAX9718 is a
single-channel amplifier while the MAX9719 is a dual-
channel amplifier for stereo systems. Both devices
deliver 1.4W continuous average power per channel to
a 4Ω load with less than 1% THD+N while operating
from a single +5V supply. The devices are available as
adjustable gain amplifiers or with internally fixed gains
of 0dB, 3dB, and 6dB to reduce component count.
A shutdown input disables the bias generator and
amplifiers and reduces quiescent current consumption
to less than 100nA. The MAX9718 shutdown input can
be set as active high or active low. These devices fea-
ture Maxim’s comprehensive click-and-pop suppres-
sion circuitry that reduces audible clicks and pops
during startup and shutdown.
The MAX9718 is pin compatible with the LM4895,
and is available in 9-bump UCSP™, 10-pin TDFN, and
10-pin µMAX packages. The MAX9719 is available in
16-pin TQFN, 16-pin TSSOP, and 16-bump UCSP pack-
ages. Both devices operate over the -40°C to +85°C
extended temperature range.
Applications
Mobile Phones
PDAs
Portable Devices
IN+
IN-
SHDN
SHDM
SINGLE SUPPLY
2.7V TO 5.5V
OUT+
OUT-
MAX9718
Features
o 2.7V to 5.5V Single-Supply Operation
o Very High -93dB PSRR at 217Hz
o 1.4W into 4Ω at 1% THD+N (per Channel)
o Differential Input
o Internal Fixed Gain to Reduce Component Count
o Adjustable Gain Option (MAX9718A/MAX9719A)
o 100nA Low-Power Shutdown Mode
o No Audible Clicks or Pops at Power-Up/Down
o Improved Performance Pin-Compatible Upgrade
to LM4895 (MAX9718D)
Ordering Information
PART
TEMP
RANGE
PIN-
PACKAGE
MAX9718AEBL-T* -40°C to +85°C 3 x 3 UCSP
MAX9718AETB* -40°C to +85°C 10 TDFN-EP**
MAX9718AEUB -40°C to +85°C 10 µMAX-EP**
*Future product—contact factory for availability.
**EP = Exposed paddle.
GAIN
(dB)
Adj
Adj
Adj
Ordering Information continued at end of data sheet.
Pin Configurations appear at end of data sheet.
UCSP is a trademark of Maxim Integrated Products, Inc.
Simplified Block Diagram
SINGLE SUPPLY
2.7V TO 5.5V
INL+
OUTL+
INL-
INR+
INR-
SHDN
OUTL-
OUTR+
MAX9719
OUTR-
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.