MAX96709 Datasheet, PDF (1/66 Pages) Maxim Integrated Products – 14-Bit GMSL Serializer with High-Immunity Mode

MAX96709
EVALUATION KIT AVAILABLE
14-Bit GMSL Serializer with High-Immunity Mode
and Coax/STP Cable Drive
General Description
The MAX96709 is a compact serializer in a 4mm x 4mm
TQFN package especially suited for automotive camera
applications.
The embedded control channel operates at 9.6kbps to
1Mbps in I²C mode, allowing programming of serializer,
deserializer, and camera registers independent of video
timing.
For driving longer cables, the IC has programmable
pre/deemphasis. Programmable spread spectrum is
available on the serial output. The serial output meets
ISO 10605 and IEC 61000-4-2 ESD standards. The
supply range is 1.7V to 1.9V.
The MAX96709 is available in a 24-pin 0.5mm lead pitch,
and operates over the -40°C to +115°C temperature
range.
Applications
●● Automotive Camera Applications
Simplified Block Diagram
VIDEO
CAM
MAX96709
I²C
VIDEO
MAX96708
GPU
I²C
Benefits and Features
●● Ideal for Safety Camera Applications
• Works with Low-Cost 50Ω Coax (100Ω STP) Cables
• Error Detection of Video Data
• High-Immunity Mode for Robust Control-Channel
EMC Tolerance
• Best-in-Class Supply Current: 88mA (max)
• Pre/Deemphasis Allows 15m Cable at Full Speed
• 24-Pin (4mm x 4mm) TQFN Package with 0.5mm
Lead Pitch
●● High-Speed Data Serialization for Megapixel
Cameras
• Up to 1.74Gbps Serial-Bit Rate
• 12.5MHz to 87MHz x 12 Bit + H/V Data
• 16.66MHz to 116MHz x 11-Bit + H/V Data
(through Internal Encoding)
●● Multiple Modes for System Flexibility
• 9.6kbps to 1Mbps Control Channel in I²C Mode
(with Clock Stretch)
• Crosspoint Switch Accepts Any Input Bitmap
• Modes for Encoded VSYNC and HSYNC
●● Reduces EMI and Shielding Requirements
• Programmable Output Spread Spectrum
• Tracks Spread Spectrum Applied at the Parallel
Input
• 1.7V to 1.9V I/O Supply
●● Peripheral Features for Camera Power-Up and
Verification
• Built-In PRBS Generator for BER Testing
• Dedicated GPO for Camera Frame-Sync Trigger
and Other Uses
• Remote/Local Wake-Up from Sleep Mode
●● Meets AEC-Q100 Automotive Specification
• -40°C to +115°C Operating Temperature
• ±8kV Contact and ±15kV Air IEC 61000-4-2 and
ISO 10605 ESD Protection
Ordering Information appears at end of data sheet.
19-8161; Rev 0; 2/16