MAX96706 Datasheet, PDF (1/73 Pages) Maxim Integrated Products – 14-Bit GMSL Deserializer with Coax or STP Cable Input

MAX96706
EVALUATION KIT AVAILABLE
14-Bit GMSL Deserializer
with Coax or STP Cable Input
General Description
The MAX96706 is a compact deserializer especially suit-
ed for automotive camera applications. Features include
adaptive equalization and an output crosspoint switch. An
embedded control channel operates at 9.6kbps to 1Mbps
in UART, I²C, and mixed UART/I²C modes, allowing pro-
gramming of serializer, deserializer (SerDes), and camera
registers, independent of video timing.
The deserializer can track data from a spread-
spectrum serial input. The serial input meets ISO 10605
and IEC 61000-4-2 ESD standards. The core supply
range is 1.7V to 1.9V and the I/O supply range is 1.7V
to 3.6V. The device is available in a 32-pin (5mm x 5mm)
TQFN package with 0.5mm lead pitch and operates over
-40°C to +115°C temperature range.
Applications
●● Automotive Camera Applications
Simplified Block Diagram
VIDEO
CAM
MAX96705
I²C
VIDEO
MAX96706
GPU
I²C
Ordering Information appears at end of data sheet.
Benefits and Features
●● Ideal for Safety Camera Applications
• Works with Low-Cost 50Ω Coax (100Ω STP) Cable
• Error Detection of Video/Control Data
• High-Immunity Mode for Robust Control-Channel
EMC Tolerance
• Retransmission of Control Data Upon Error
• Best-in-Class Supply Current: 190mA (max)
• Adaptive Equalization for 15m Cable at Full Speed
• 32-Pin (5mm x 5mm) TQFN Package
• Horizontal- and Vertical-Sync Encoding
and Tracking
●● High-Speed Deserialization for Megapixel Cameras
• Up to 1.74Gbps Serial-Bit Rate
• 6.25MHz to 87MHz x 12-Bit + H/V Data
• 36.66MHz to 116MHz x 12-Bit + H/V Data
(through Internal Encoding)
●● Multiple Modes for System Flexibility
• 9.6kbps to 1Mbps Control Channel in UART, I²C
(with Clock Stretch), or UART-to-I²C Modes
• 2:1 Input Mux for Camera Selection
• 15 Hardware-Selectable I²C-Device Addresses
• Pairs with Any Maxim GMSL Serializer
• Crosspoint Switch Maps Data to any Output
●● Reduces EMI and Shielding Requirements
• Spread-Spectrum Serial-Input Tracking and Transfer
to the Parallel Output
• 1.7V to 1.9V Core and 1.7V to 3.6V I/O Supply
●● Peripheral Features for System Verification
• Built-In PRBS Receiver for BER Testing
• Eye-Width Monitor Allows In-System Test of High-
Speed Serial Link
• Dedicated “Up/Down” GPI for Camera Frame Sync
Trigger and Other Uses
●● Meets AEC-Q100 Automotive Specification
• -40°C to +115°C Operating Temperature Range
• ±8kV Contact and ±15kV Air IEC 61000-4-2 and
ISO 10605 ESD Protection
19-8248; Rev 0; 4/16