English
Language : 

MAX9541 Datasheet, PDF (1/16 Pages) Maxim Integrated Products – Quadruple, 2:1, Mux Amplifiers for Standard-Definition and VGA Signals
19-4457; Rev 0; 2/09
Quadruple, 2:1, Mux Amplifiers for
Standard-Definition and VGA Signals
General Description
The MAX9541/MAX9542 are quadruple-channel, 2:1
video mux amplifiers with input sync tip clamps. These
devices select between two video sources and support
up to four channels on each source. The MAX9541 has
integrated lowpass filters that are optimized for standard-
definition video signals such as composite and red,
green, blue (RGB). The filters typically have ±1dB pass-
band flatness out to 9.5MHz and 47dB attenuation at
27MHz. The MAX9542 has a wider bandwidth of 15MHz
because it does not have integrated lowpass filters, mak-
ing it suitable for not only standard-definition video sig-
nals, but also video graphics array (VGA) signals with a
640 x 480 resolution at up to 85Hz refresh rate.
Video signals are AC-coupled to the inputs of the
MAX9541/MAX9542. The input sync-tip clamps set the
internal DC level.
The amplifiers have 2V/V gain, and the outputs can be
DC-coupled to a 75Ω load, which is the equivalent of two
video loads, or AC-coupled to a 150Ω load.
Both the MAX9541/MAX9542 feature a low-power shut-
down mode, in which supply current is reduced to 35µA.
Applications
Automotive Infotainment
Features
♦ Quad 2:1 Video Mux Amplifiers
♦ Reconstruction Filters with 9.5MHz Passband and
47dB Attenuation at 27MHz (MAX9541)
♦ Fixed Gain of 2V/V
♦ Input Sync-Tip Clamps
♦ Shutdown
♦ 2.7V to 3.6V Single-Supply Operation
Ordering Information
PART
PIN-PACKAGE
STANDARD-
DEFINITION
VIDEO FILTER
MAX9541AEE+
16 QSOP
Yes
MAX9542AEE+
16 QSOP
No
Note: All devices are specified over the -40°C to +125°C oper-
ating temperature range.
+Denotes a lead(Pb)-free/RoHS-compliant package.
Functional Diagram
UNKNOWN
BIAS
SHDN
A/B
IN0A
IN1A
IN2A
IN3A
IN0B
IN1B
IN2B
IN3B
VDD
MAX9541
0
MAX9542
1
CLAMPREF
0
1
OUT0
LPF*
2V/V
300mV
LPF*
2V/V
OUT1
CLAMPREF
0
1
LPF*
2V/V
OUT2
CLAMPREF
0
1
CLAMPREF
OUT3
LPF*
2V/V
GND
*LOWPASS FILTER IN MAX9541 ONLY.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.