MAX9248 Datasheet, PDF (1/20 Pages) Maxim Integrated Products – 27-Bit, 2.5MHz to 42MHz DC-Balanced LVDS Deserializers

19-3943; Rev 3; 4/09
27-Bit, 2.5MHz to 42MHz
DC-Balanced LVDS Deserializers
General Description
The MAX9248/MAX9250 digital video serial-to-parallel
converters deserialize a total of 27 bits during data and
control phases. In the data phase, the LVDS serial input is
converted to 18 bits of parallel video data and in the con-
trol phase, the input is converted to 9 bits of parallel con-
trol data. The separate video and control phases take
advantage of video timing to reduce the serial-data rate.
The MAX9248/MAX9250 pair with the MAX9247 serializer
to form a complete digital video transmission system. For
operating frequencies less than 35MHz, the MAX9248/
MAX9250 can also pair with the MAX9217 serializer.
The MAX9248 features spread-spectrum capability,
allowing output data and clock to spread over a speci-
fied frequency range to reduce EMI. The data and
clock outputs are programmable for a spectrum spread
of ±4% or ±2%. The MAX9250 features output enable
input control to allow data busing.
Proprietary data decoding reduces EMI and provides
DC balance. The DC balance allows AC-coupling, pro-
viding isolation between the transmitting and receiving
ends of the interface. The MAX9248/MAX9250 feature a
selectable rising or falling output latch edge.
ESD tolerance is specified for ISO 10605 with ±10kV
Contact Discharge and ±30kV Air-Gap Discharge.
The MAX9248/MAX9250 operate from a +3.3V ±10%
core supply and feature a separate output supply for
interfacing to 1.8V to 3.3V logic-level inputs. These
devices are available in a 48-lead LQFP package and
are specified from -40°C to +85°C or -40°C to +105°C.
Features
o Programmable ±4% or ±2% Spread-Spectrum
Output for Reduced EMI (MAX9248)
o Proprietary Data Decoding for DC Balance and
Reduced EMI
o Control Data Deserialized During Video Blanking
o Five Control Data Inputs are Single-Bit-Error
Tolerant
o Output Transition Time is Scaled to Operating
Frequency for Reduced EMI
o Staggered Output Switching Reduces EMI
o Output Enable Allows Busing of Outputs
(MAX9250)
o Clock Pulse Stretch on Lock
o Wide ±2% Reference Clock Tolerance
o Synchronizes to MAX9247 Serializer Without
External Control
o ISO 10605 and IEC 61000-4-2 Level 4
ESD Protection
o Separate Output Supply Allows Interface to 1.8V
to 3.3V Logic
o +3.3V Core Power Supply
o Space-Saving LQFP Package
o -40°C to +85°C and -40°C to +105°C Operating
Temperature Ranges
Applications
Navigation System Displays
In-Vehicle Entertainment Systems
Video Cameras
LCD Displays
Ordering Information
PART
TEMP RANGE
PIN-PACKAGE
MAX9248ECM+
-40°C to +85°C
48 LQFP
MAX9248ECM/V+ -40°C to +85°C
48 LQFP
MAX9248GCM+ -40°C to +105°C
48 LQFP
MAX9248GCM/V+ -40°C to +105°C
48 LQFP
MAX9250ECM+
-40°C to +85°C
48 LQFP
MAX9250ECM/V+ -40°C to +85°C
48 LQFP
MAX9250GCM+ -40°C to +105°C
48 LQFP
MAX9250GCM/V+ -40°C to +105°C
48 LQFP
+Denotes a lead(Pb)-free/RoHS-compliant package.
/V denotes an automotive qualified part.
Pin Configuration appears at end of data sheet.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.