MAX9153 Datasheet, PDF (1/11 Pages) Maxim Integrated Products – Low-Jitter, 800Mbps, 10-Port LVDS Repeaters with 100 ΩDrive

19-2167; Rev 0; 10/01
EVAALVUAAILTAIOBNLEKIT
Low-Jitter, 800Mbps, 10-Port LVDS
Repeaters with 100Ω Drive
General Description
The MAX9153/MAX9154 low-jitter, low-voltage differential
signaling (LVDS) repeaters are ideal for applications that
require high-speed data or clock distribution while mini-
mizing power, space, and noise. The devices accept a
single LVDS input (MAX9153) or single LVPECL input
(MAX9154) and repeat the signal at 10 LVDS outputs.
Each differential output drives 100Ω, allowing point-to-
point distribution of signals on transmission lines with
100Ω termination at the receiver input.
Ultra-low 90ps_p-p (max) added deterministic jitter and
1ps_RMS (max) added random jitter ensure reliable com-
munication in high-speed links that are highly sensitive to
timing error, especially those incorporating clock-and-
data recovery or serializers and deserializers. The high-
speed switching performance guarantees 800Mbps data
rate and less than 60ps (max) skew between channels
while operating from a single +3.3V supply.
Supply current at 800Mbps is 118mA and reduces to
2µA in power-down mode. LVDS inputs and outputs con-
form to the ANSI/EIA/TIA -644 standard. A fail-safe fea-
ture on the MAX9153 sets the output high when the input
is undriven and open, terminated, or shorted. The
MAX9153/MAX9154 are available in a 28-pin TSSOP
package and are specified for the -40°C to +85°C
extended temperature range.
Refer to the MAX9150 data sheet for a pin-compatible
10-port LVDS repeater capable of driving a double-termi-
nated (50Ω) LVDS link.
Refer to the MAX9110/MAX9112 and MAX9111/MAX9113
data sheets for LVDS line drivers and receivers.
Applications
Cellular Phone Base-Stations
Add/Drop Muxes
Digital Cross-Connects
Network Switches/Routers
Backplane Interconnect
Clock Distribution
Pin Configuration appears at end of data sheet.
Features
o Ultra-Low 90ps_p-p (max) Added Deterministic
Jitter at 800Mbps (2²³-1) PRBS Pattern
o 1ps_RMS (max) Added Random Jitter
o 60ps (max) Skew Between Channels
o Guaranteed 800Mbps Data Rate
o LVDS (MAX9153) or LVPECL (MAX9154) Input
Versions
o Fail-Safe Circuit Sets Output High for Undriven
Inputs (MAX9153)
o High-Impedance Differential Input when V_CC = 0
o 2µA Power-Down Supply Current
o Conforms to ANSI/EIA/TIA-644 LVDS Standard
o Pin-Compatible Upgrade to DS90LV110
Ordering Information
PART
MAX9153EUI
MAX9154EUI
TEMP.
RANGE
-40°C to +85°C
-40°C to +85°C
PIN-
PACKAGE
28 TSSOP
28 TSSOP
INPUT
LVDS
LVPECL
Typical Application Circuit
LVDS*
MAX9153
MAX9154
TX
100Ω
MAX9110
*(LVPECL INPUT FOR MAX9154)
LVDS
1
100Ω
RX
BACKPLANE
OR CABLE
MAX9111
10
100Ω
RX
MAX9111
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.