MAX9130EXT Datasheet, PDF (1/8 Pages) Maxim Integrated Products – Single 500Mbps LVDS Line Receiver in SC70

19-2155; Rev 0; 10/01
Single 500Mbps LVDS Line Receiver in SC70
General Description
The MAX9130 is a single low-voltage differential signal-
ing (LVDS) line receiver ideal for applications requiring
high data rates, low power, and low noise. The device
is guaranteed to receive data at speeds up to 500Mbps
(250MHz).
The MAX9130 accepts an LVDS differential input and
translates it to an LVTTL/LVCMOS output. The fail-safe
feature sets the output high when the inputs are undriv-
en and open, terminated, or shorted. The device sup-
ports a wide common-mode input range, allowing a
ground potential difference and common-mode noise
between the driver and the receiver. The MAX9130
conforms to the ANSI/TIA/EIA-644 LVDS standard.
The MAX9130 operates from a single +3.3V supply,
and is specified for operation from -40°C to +85°C. It is
available in a space-saving 6-pin SC70 package. Refer
to the MAX9110/MAX9112 data sheet for single/dual
LVDS line drivers. Refer to the MAX9115 for a lower
speed (200Mbps) single LVDS line receiver in SC70.
Applications
Clock Distribution
Cellular Phone Base Stations
Digital Cross-Connects
Network Switches/Routers
DSLAMs
Features
o Space-Saving SC70 Package (50% Smaller than
SOT23)
o Guaranteed 500Mbps Data Rate
o Low 250ps (max) Pulse Skew
o High-Impedance LVDS Inputs When Powered Off
Allow Hot Swapping
o Conforms to ANSI TIA/EIA-644 LVDS Standard
o Single +3.3V Supply
o Fail-Safe Circuit Sets Output High for Undriven
Inputs (Open, Terminated, or Shorted)
o Low 150µA (typ) Supply Current in Fail-Safe Mode
Ordering Information
PART
MAX9130EXT-T
TEMP.
RANGE
-40°C to +85°C
PIN-
PACKAGE
6 SC70-6
TOP
MARK
ABB
Typical Application Circuit
Pin Configuration
CLOCK
INPUT
CLOCK
INPUT
CLOCK
INPUT
TOP VIEW
MAX9130
Rx
MAX9130
Rx
MAX9130
Rx
V_CC 1
GND 2
6 OUT
5 GND
CLOCK
SOURCE ^Tx
REFERENCE CLOCK DISTRIBUTION
USING MAX9130 IN A MULTIDROP CONFIGURATION
LVDS SIGNALS
100Ω
TERMINATION
IN- 3
MAX9130
SC70
4 IN+
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.