|
MAX9124 Datasheet, PDF (1/9 Pages) Maxim Integrated Products – Quad LVDS Line Driver | |||
|
19-1991; Rev 0; 4/01
EVAALVUAAILTAIOBNLEKIT
Quad LVDS Line Driver
General Description
The MAX9124 quad low-voltage differential signaling
(LVDS) line driver is ideal for applications requiring high
data rates, low power, and low noise. The MAX9124 is
guaranteed to transmit data at speeds up to 800Mbps
(400MHz) over controlled impedance media of approxi-
mately 100â¦. The transmission media may be printed
circuit (PC) board traces, backplanes, or cables.
The MAX9124 accepts four LVTTL/LVCMOS input levels
and translates them to LVDS output signals. Moreover,
the MAX9124 is capable of setting all four outputs to a
high-impedance state through two enable inputs, EN and
EN, thus dropping the device to an ultra-low-power state
of 16mW (typ) during high impedance. The enables are
common to all four transmitters. Outputs conform to the
ANSI TIA/EIA-644 LVDS standard.
The MAX9124 operates from a single +3.3V supply and is
specified for operation from -40°C to +85°C. It is available
in 16-pin TSSOP and SO packages. Refer to the MAX9125/
MAX9126 data sheet for quad LVDS line receivers.
Features
o Pin Compatible with DS90LV031A
o Guaranteed 800Mbps Data Rate
o 250ps Maximum Pulse Skew
o Conforms to TIA/EIA-644 LVDS Standard
o Single +3.3V Supply
o 16-Pin TSSOP and SO Packages
PART
MAX9124EUE
MAX9124ESE
Ordering Information
TEMP. RANGE
-40°C to +85°C
-40°C to +85°C
PIN-PACKAGE
16 TSSOP
16 SO
Digital Copiers
Laser Printers
Cell Phone Base
Stations
Add/Drop Muxes
Digital Cross-Connects
Applications
DSLAMs
Network
Switches/Routers
Backplane
Interconnect
Clock Distribution
Typical Applications Circuit
LVDS SIGNALS
MAX9124
MAX9126
TX
115â¦
RX
Pin Configuration
TOP VIEW
IN1 1
OUT1+ 2
OUT1- 3
EN 4
OUT2- 5
OUT2+ 6
IN2 7
GND 8
16 VCC
15 IN4
MAX9124
14 OUT4+
13 OUT4-
12 EN
11 OUT3-
10 OUT3+
9 IN3
TSSOP/SO
TX
LVTTL/LVCMOS
DATA INPUT
TX
115â¦
RX
115â¦
RX
LVTTL/LVCMOS
DATA OUTPUT
TX
115â¦
RX
100⦠SHIELDED TWISTED CABLE OR MICROSTRIP PC BOARD TRACES
* Future productâcontact factory for availability.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maximâs website at www.maxim-ic.com.
|
▷ |