MAX9115 Datasheet, PDF (1/8 Pages) Maxim Integrated Products – Single LVDS Line Receiver in SC70

19-1995; Rev 0; 4/01
Single LVDS Line Receiver in SC70
General Description
The MAX9115 is a single low-voltage differential signal-
ing (LVDS) line receiver ideal for applications requiring
high data rates, low power, and low noise. The device
is guaranteed to receive data at speeds up to 200Mbps
(100MHz).
The MAX9115 accepts an LVDS differential input and
translates it to an LVTTL/LVCMOS output. The fail-safe
feature sets the output high when the inputs are undriv-
en and open, terminated, or shorted. The device sup-
ports a wide common-mode input range, allowing a
ground potential difference and common-mode noise
between the driver and the receiver. The MAX9115
conforms to the ANSI TIA/EIA-644 LVDS standard.
The MAX9115 operates from a single +3.3V supply,
and is specified for operation from -40°C to +85°C. It is
available in a space-saving 5-pin SC70 package. Refer
to the MAX9110/MAX9112 data sheet for single/dual
LVDS line drivers.
Features
o Space-Saving SC70 Package (50% Smaller than
SOT23)
o Guaranteed 200Mbps Data Rate
o Low 350ps (max) Pulse Skew
o High-Impedance LVDS Inputs When Powered Off
Allow Hot Swapping
o Conforms to ANSI TIA/EIA-644 LVDS Standard
o Single +3.3V Supply
o Fail-Safe Circuit Sets Output High for Undriven
Inputs (Open, Terminated, or Shorted)
o Low 150µA (typ) Supply Current in Fail-Safe Mode
Applications
Clock Distribution
Cellular Phone Base Stations
Digital Cross-Connects
Network Switches/Routers
DSLAMs
Laser Printers
Ordering Information
PART
MAX9115EXK-T
TEMP.
RANGE
-40°C to +85°C
PIN-
PACKAGE
5 SC70-5
TOP
MARK
ACI
Typical Application Circuit
Pin Configuration
CLOCK
INPUT
CLOCK
INPUT
CLOCK
INPUT
TOP VIEW
MAX9115
Rx
MAX9115
Rx
MAX9115
Rx
V_CC 1
5 OUT
Rx
GND 2
CLOCK
SOURCE ^Tx
REFERENCE CLOCK DISTRIBUTION
USING MAX9115 IN A MULTIDROP CONFIGURATION
LVDS SIGNALS
100Ω
TERMINATION
IN- 3
MAX9115
SC70
4 IN+
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.