MAX9111_09 Datasheet, PDF (1/10 Pages) Maxim Integrated Products – Single/Dual LVDS Line Receivers with Ultra-Low Pulse Skew in SOT23

19-1803; Rev 3; 3/09
Single/Dual LVDS Line Receivers with
Ultra-Low Pulse Skew in SOT23
General Description
The MAX9111/MAX9113 single/dual low-voltage differen-
tial signaling (LVDS) receivers are designed for high-
speed applications requiring minimum power
consumption, space, and noise. Both devices support
switching rates exceeding 500Mbps while operating from
a single +3.3V supply, and feature ultra-low 300ps (max)
pulse skew required for high-resolution imaging applica-
tions such as laser printers and digital copiers.
The MAX9111 is a single LVDS receiver, and the
MAX9113 is a dual LVDS receiver.
Both devices conform to the EIA/TIA-644 LVDS standard
and convert LVDS to LVTTL/CMOS-compatible outputs.
A fail-safe feature sets the outputs high when the inputs
are undriven and open, terminated, or shorted. The
MAX9111/MAX9113 are available in space-saving 8-pin
SOT23 and SO packages. Refer to the MAX9110/
MAX9112 data sheet for single/dual LVDS line drivers.
Features
o Low 300ps (max) Pulse Skew for High-Resolution
Imaging and High-Speed Interconnect
o Space-Saving 8-Pin SOT23 and SO Packages
o Pin-Compatible Upgrades to DS90LV018A and
DS90LV028A (SO Packages Only)
o Guaranteed 500Mbps Data Rate
o Low 29mW Power Dissipation at 3.3V
o Conform to EIA/TIA-644 Standard
o Single +3.3V Supply
o Flow-Through Pinout Simplifies PCB Layout
o Fail-Safe Circuit Sets Output High for Undriven
Inputs
o High-Impedance LVDS Inputs when Powered Off
Ordering Information
________________________Applications
Laser Printers
Network Switches/Routers
Digital Copiers
LCD Displays
PART
MAX9111EKA
MAX9111ESA
TEMP
RANGE
-40°C to +85°C
-40°C to +85°C
PIN-
PACKAGE
8 SOT23
8 SO
TOP
MARK
AAEE
—
Cellular Phone
Base Stations
Telecom Switching
Equipment
Backplane Interconnect
Clock Distribution
MAX9113EKA
-40°C to +85°C 8 SOT23
MAX9113ESA
-40°C to +85°C 8 SO
MAX9113ASA/V+ -40°C to +125°C 8 SO
/V denotes an automotive qualified part.
+Denotes a lead(Pb)-free/RoHS-compliant package.
AAED
—
—
Typical Operating Circuit appears at end of data sheet.
Pin Configurations/Functional Diagrams/Truth Table
MAX9111
MAX9111
MAX9113
MAX9113
IN- 1
IN+ 2
N.C. 3
N.C. 4
8 V_CC V_CC 1
7 OUT GND 2
6 N.C. OUT 3
5 GND N.C. 4
MAX9111
8 IN- IN1- 1
7 IN+ IN1+ 2
6 N.C. IN2+ 3
5 N.C. IN2- 4
8 V_CC VCC 1
7 OUT1 GND 2
6 OUT2 OUT1 3
5 GND OUT2 4
8 IN1-
7 IN1+
6 IN2+
5 IN2-
SO
SOT23
SO
SOT23
(IN_+) - (IN_-)
≥ 100mV
-100mV
OPEN
SHORT
100Ω PARALLEL TERMINATION (UNDRIVEN)
OUT_
H
L
H
H
H
H = LOGIC LEVEL HIGH
L = LOGIC LEVEL LOW
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim's website at www.maxim-ic.com.