MAX9110 Datasheet, PDF (1/8 Pages) Maxim Integrated Products – Single/Dual LVDS Line Drivers with Ultra-Low Pulse Skew in SOT23

19-1771; Rev 0; 9/00
Single/Dual LVDS Line Drivers with
Ultra-Low Pulse Skew in SOT23
General Description
The MAX9110/MAX9112 single/dual low-voltage differ-
ential signaling (LVDS) transmitters are designed for
high-speed applications requiring minimum power con-
sumption, space, and noise. Both devices support
switching rates exceeding 500Mbps while operating
from a single +3.3V supply, and feature ultra-low 250ps
(max) pulse skew required for high-resolution imaging
applications, such as laser printers and digital copiers.
The MAX9110 is a single LVDS transmitter, and the
MAX9112 is a dual LVDS transmitter.
Both devices conform to the EIA/TIA-644 LVDS standard.
They accept LVTTL/CMOS inputs and translate them to
low-voltage (350mV) differential outputs, minimizing elec-
tromagnetic interference (EMI) and power dissipation.
These devices use a current-steering output stage, mini-
mizing power consumption, even at high data rates. The
MAX9110/MAX9112 are available in space-saving 8-pin
SOT23 and SO packages. Refer to the MAX9111/
MAX9113 data sheet for single/dual LVDS line receivers.
________________________Applications
Laser Printers
Network Switches/Routers
Digital Copiers
LCD Displays
Cellular Phone Base
Stations
Telecom Switching
Equipment
Backplane Interconnect
Clock Distribution
Features
o Low 250ps (max) Pulse Skew for High-Resolution
Imaging and High-Speed Interconnect
o Space-Saving 8-Pin SOT23 and SO Packages
o Pin-Compatible Upgrades to DS90LV017/017A
and DS90LV027/027A (SO Packages)
o Guaranteed 500Mbps Data Rate
o Low 22mW Power Dissipation at 3.3V
(31mW for MAX9112)
o Conform to EIA/TIA-644 Standard
o Single +3.3V Supply
o Flow-Through Pinout Simplifies PC Board Layout
o Driver Outputs High Impedance when Powered Off
Ordering Information
PART
MAX9110EKA-T
MAX9110ESA
MAX9112EKA-T
MAX9112ESA
TEMP.
RANGE
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
PIN-
PACKAGE
8 SOT23-8
8 SO
8 SOT23-8
8 SO
TOP
MARK
AADN
—
AADO
—
Typical Operating Circuit appears at end of data sheet.
Pin Configurations/Functional Diagrams/Truth Table
TOP VIEW
V_CC 1
DIN 2
N.C. 3
GND 4
MAX9110
SO
MAX9110
8 DO- DIN 1
7 DO+ GND 2
6 N.C. N.C. 3
5 N.C. V_CC 4
8 DO- VCC 1
7 DO+ DIN1 2
6 N.C. DIN2 3
5 N.C. GND 4
SOT23
DIN_
L
H
0.8V < V_DIN_ < 2.0V
DO_+
L
H
X
MAX9112
8 DO1- DIN1 1
7 DO1+ GND 2
6 DO2+ DIN2 3
5 DO2- VCC 4
MAX9112
SO
DO_-
H
L
X
SOT23
H = LOGIC LEVEL HIGH
L = LOGIC LEVEL LOW
X = UNDETERMINED
8 DO1-
7 DO1+
6 DO2+
5 DO2-
________________________________________________________________ Maxim Integrated Products 1
For free samples and the latest literature, visit www.maxim-ic.com or phone [phone].
For small orders, phone [phone].