MAX9043 Datasheet, PDF (1/15 Pages) Maxim Integrated Products – Micropower, Single-Supply, UCSP/SOT23 Comparator + Precision Reference ICs

19-1569; Rev 4; 10/02
Micropower, Single-Supply, UCSP/SOT23
Comparator + Precision Reference ICs
General Description
The MAX9039–MAX9043 and MAX9050–MAX9053 fea-
ture combinations of low-power comparators and preci-
sion voltage references. Their operating voltage range
makes them ideal for both 3V and 5V systems. The
MAX9039/MAX9040/MAX9041/MAX9050/MAX9051
have a single comparator and reference consuming
only 40µA of supply current. The MAX9042/MAX9043/
MAX9052/MAX9053 have dual comparators and one
reference, and consume only 55µA of supply current.
Low-voltage operation and low supply current make
these devices ideal for battery-operated systems.
The comparators feature Rail-to-Rail^® inputs and out-
puts, with a common-mode input voltage range that
extends 250mV beyond the supply rails. Input bias cur-
rent is typically 1.0pA, and input offset voltage is typi-
cally 0.5mV. Internal hysteresis ensures clean output
switching, even with slow-moving input signals. The
output stage features a unique design that limits supply
current surges while switching, virtually eliminating sup-
ply glitches typical of many other comparators. This
design also minimizes overall power consumption
under dynamic conditions. The comparator outputs
have rail-to-rail, push-pull output stages that sink and
source up to 8mA. The propagation delay is 400ns,
even with the low-operating supply current.
The reference output voltage is set to 1.23V in the
MAX9039, to 2.048V in the MAX9040–MAX9043, and to
2.500V in the MAX9050–MAX9053. The MAX9040–
MAX9043 and the MAX9050–MAX9053 are offered in
two grades: an A grade with 0.4% initial accuracy and
6ppm/°C tempco, and a B grade with 1% initial accura-
cy and 100ppm/°C tempco. The voltage references
feature a proprietary curvature-correction circuit and
laser-trimmed thin-film resistors. These series-mode ref-
erences can sink or source up to 500µA of load current.
Precision Battery
Management
Window Comparators
IR Receivers
Applications
Level Translators
Digital Line Receivers
Features
o Comparator + Precision Reference in UCSP/SOT23
o 2.5V to 5.5V Single-Supply Operation
(MAX9039–MAX9043)
o Low Supply Current (MAX9039/MAX9040/
MAX9041/MAX9050/MAX9051)
40µA Quiescent
50µA with 100kHz Switching
o 400ns Propagation Delay
o Rail-to-Rail Inputs
o Rail-to-Rail Output Stage Sinks and Sources 8mA
o Internal ±3mV Hysteresis
o Voltage Reference Offers:
±0.4% (max) Initial Accuracy (A grade)
6ppm/°C (typ) Temperature Coefficient (A grade)
Stable for 0 to 4.7nF Capacitive Loads
Ordering Information
PART
TEMP RANGE
PIN-
PACKAGE
TOP
MARK
MAX9039BEBT-T* -40°C to +85°C
MAX9040AEUK-T -40°C to +85°C
MAX9040BEUK-T -40°C to +85°C
MAX9041AEUT-T -40°C to +85°C
MAX9041BEUT-T -40°C to +85°C
MAX9041AESA -40°C to +85°C
MAX9041BESA -40°C to +85°C
6 UCSP-6
5 SOT23-5
5 SOT23-5
6 SOT23-6
6 SOT23-6
8 SO
8 SO
AAZ
ADNW
ADNX
AAHF
AAHH
—
—
*UCSP reliability is integrally linked to the user’s assembly
methods, circuit board material, and environment. Refer to the
UCSP Reliability section of this data sheet for more information.
Ordering Information continued at end of data sheet.
Selector Guide appears at end of data sheet.
Pin Configurations
TOP VIEW (BUMPS ON BOTTOM)
TOP VIEW
IN+ B1
A1
V_EE OUT 1
5 V_CC
MAX9039
MAX9040
IN- B2
A2 OUT VEE 2 _MAX9050
Typical Operating Circuit and Functional Diagrams appear
at end of data sheet.
Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd.
UCSP is a trademark of Maxim Integrated Products, Inc.
REF B3
A3 V_CC ^{IN+ 3}
4 REF
UCSP
SOT23-5
Pin Configurations continued at end of data sheet.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.