MAX9010 Datasheet, PDF (1/12 Pages) Maxim Integrated Products – SC70, 5ns, Low-Power, Single-Supply, Precision TTL Comparators

19-1932; Rev 1; 1/02
SC70, 5ns, Low-Power, Single-Supply,
Precision TTL Comparators
General Description
The MAX9010/MAX9011/MAX9013 single and MAX9012
dual, high-speed comparators operate from a single
4.5V to 5.5V power supply and feature low-current con-
sumption. They have precision differential inputs and
TTL outputs. They feature short propagation delay (5ns,
typ), low-supply current, and a wide common-mode
input range that includes ground. They are ideal for low-
power, high-speed, single-supply applications.
The comparator outputs remain stable through the linear
region when driven with slow-moving or low input-over-
drive signals, eliminating the output instability common
to other high-speed comparators. The input voltage
range extends to 200mV below ground with no output
phase reversal. The MAX9013 features complementary
outputs and both the MAX9011/MAX9013 have a latch
enable input (LE). The MAX9013 is an improved plug-in
replacement for the industry-standard MAX913 and
LT1016/LT1116, offering lower power and higher speed
when used in a single 5V supply application.
For space-critical designs, the single MAX9010 is avail-
able in the tiny 6-pin SC70 package. The single
MAX9011 is available in a space-saving 6-pin SOT23
package. The dual MAX9012 and the single MAX9013
are available in 8-pin µMAX and 8-pin SO packages. All
products in the family are guaranteed over the extended
temperature range of -40°C to +85°C.
Applications
High-Speed Signal Squaring
Zero-Crossing Detectors
High-Speed Line Receivers
High-Speed Sampling Circuits
High-Speed Triggers
Fast Pulse-Width/Height Discriminators
____________________________Features
o Ultra-Fast, 5ns Propagation Delay
o Low Quiescent Current:
900µA (MAX9010/MAX9011)
1.3mA (MAX9013)
2.4mA (MAX9012)
o Single-Supply 4.5V to 5.5V Applications
o Input Range Extends Below Ground
o No Minimum Input Signal Slew-Rate Requirement
o No Supply-Current Spikes During Switching
o Stable when Driven with Slow-Moving Inputs
o No Output Phase Reversal for Overdriven Inputs
o TTL-Compatible Outputs (Complementary for
MAX9013)
o Latch Function Included (MAX9011/MAX9013)
o High-Precision Comparators
0.7mV Input Offset Voltage
3.0V/mV Voltage Gain
o Available in Tiny 6-Pin SC70 and SOT23 Packages
Ordering Information
PART
TEMP RANGE ^PIN-
PACKAGE
MAX9010EXT-T -40°C to +85°C 6 SC70-6
MAX9011EUT-T -40°C to +85°C 6 SOT23-6
MAX9012EUA -40°C to +85°C 8 µMAX
MAX9012ESA -40°C to +85°C 8 SO
MAX9013EUA -40°C to +85°C 8 µMAX
MAX9013ESA -40°C to +85°C 8 SO
Selector Guide appears at end of data sheet.
TOP
MARK
AAA
AADD
—
—
—
—
Pin Configurations
TOP VIEW
OUT 1
GND 2
IN+ 3
+–
MAX9010
SC70
6 V_CC OUT 1
5 V_CC GND 2
4 IN- IN+ 3
+–
MAX9011
SOT23
6 V_CC INA+ 1
5 LE
INA- 2
INB+ 3
INB- 4
4 IN-
+
_
+
_
MAX9012
SO/µMAX
8 V_CC V_CC 1
7 OUTA IN+ 2
6 OUTB IN- 3
5 GND N.C. 4
MAX9013
SO/µMAX
8 OUT
7 OUT
6 GND
5 LE
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.