|
MAX8971 Datasheet, PDF (1/39 Pages) Maxim Integrated Products – Industrys Smallest 1.55A 1-Cell Li+ DC-DC Charger | |||
|
19-4245; Rev 0; 1/12
EVALUATION KIT AVAILABLE
MAX8971
Industry's Smallest 1.55A
1-Cell Li+ DC-DC Charger
General Description
The MAX8971 is a compact, high-frequency, high-
efficiency switch-mode charger for a one-cell lithium-ion
(Li+) battery. It delivers up to 1.55A of current to the
battery from inputs up to 7.5V and withstands transient
inputs up to 22V. The 4MHz switch-mode charger is
ideally suited for small portable devices, such as head-
sets and ultra-portable media players. It minimizes
component size and heat.
Battery-protection features include: low-voltage prequali-
fication, charge fault timer, die temperature monitoring,
and battery temperature monitoring. The battery
temperature monitoring adjusts the charge current and
termination voltage for safe use of secondary lithium-ion
batteries.
The IC accepts either a general DC input or USB.
It has programmable automatic input-current limiting to pro-
tect upstream charging sources such as USB.
Charge parameters are easily adjustable through an I2C
interface. Charge is terminated based on user-selectable
minimum current level. A safety timer with reset control
provides a safety backup for I2C interface. Charge status
is provided to the application processor through an inter-
rupt pin.
The IC is available in a space-saving, 20-bump, 2.18mm
x 1.62mm WLP package.
Applications
USB Charging
Headsets and Media Players
Smartphones
Digital Cameras
GPS, PDAs
Benefits and Features
S Switch-Mode Charger
ï² High-Efficiency
ï² Low Heat
ï² Fast Charge Time
S Small and Simple
S Precise
ï² Up to Q5% Current Regulation and 0.5% Voltage
Regulation
S Safe
ï² JEITA Battery Temperature Monitor
ï² Over / Undervoltage Protection, Safety Timers,
Temperature Regulation
ï² USB Friendly
S Flexible
ï² Programmable Voltage/Current
ï² Status / Interrupts Through I2C
ï² Automatic Input Current Limit
S I2C Interface
ï² Input Current Limit (100mA to 1500mA)
ï² Fast-Charge / Termination Current (250mA to
1550mA)
ï² Charge Voltage (4.1V, 4.15V, 4.2V, 4.35V)
ï² Safety Timer
ï² Termination Enable
S +22V Absolute Maximum Input Voltage Rating
S Up to 7.5V Maximum Operating Input Voltage
S 5V USB/Safeout LDO for USB PHY
S 2.3A GSM RF Test Mode (Factory Testing)
S Charge Current to Voltage Conversion (VICHG) for
Baseband ADC
S Reverse Battery Leakage Protection
S Input /Output Overvoltage Protection
S Interrupt Status Output
Ordering Information appears at end of data sheet.
For related parts and recommended products to use with this part,
refer to www.maxim-ic.com/MAX8971.related.
Simplified Applications Circuit appears at end of data sheet.
����������������������������������������������������������������� Maxim Integrated Productsââ1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maximâs website at www.maxim-ic.com.
|
▷ |