MAX8842 Datasheet, PDF (1/10 Pages) Maxim Integrated Products – Ultra-Low-Noise, High PSRR, Low-Dropout, 150mA Linear Regulators in μDFN

19-0629; Rev 0; 10/06
Ultra-Low-Noise, High PSRR, Low-Dropout,
150mA Linear Regulators in µDFN
General Description
The MAX8840/MAX8841/MAX8842 ultra-low-noise, low-
dropout (LDO) linear regulators are designed to deliver
up to 150mA continuous output current. These regula-
tors achieve a low 120mV dropout for 120mA load cur-
rent. The MAX8840 uses an advanced architecture to
achieve ultra-low output voltage noise of 11µV_RMS and
PSRR of 54dB at 100kHz.
The MAX8841 does not require a bypass capacitor,
hence achieving the smallest PC board area. The
MAX8842 output voltage can be adjusted with an exter-
nal divider.
The MAX8840/MAX8841 are preset to a variety of volt-
ages in the 1.5V to 4.5V range. Designed with a p-channel
MOSFET series pass transistor, the MAX8840/MAX8841/
MAX8842 maintain very low ground current (40µA).
The regulators are designed and optimized to work with
low-value, low-cost ceramic capacitors. The MAX8840
requires only 1µF (typ) of output capacitance for stability
with any load. When disabled, current consumption drops
to below 1µA.
The MAX8840/MAX8841/MAX8842 are available in a tiny
1mm x 1.5mm x 0.8mm µDFN.
Applications
Cellular and Cordless Phones
PDA and Palmtop Computers
Base Stations
Bluetooth Portable Radios and Accessories
Wireless LANs
Digital Cameras
Personal Stereos
Portable and Battery-Powered Equipment
Typical Operating Circuits
Features
♦ Space-Saving 1.0mm x 1.5mm x 0.8mm µDFN
♦ 11µV_RMS Output Noise at 100Hz to 100kHz
Bandwidth (MAX8840)
♦ 78dB PSRR at 1kHz (MAX8840)
♦ 120mV Dropout at 120mA Load
♦ Stable with 1µF Ceramic Capacitor for Any Load
♦ Guaranteed 150mA Output
♦ Only Need Input and Output Capacitors (MAX8841)
♦ Output Voltages: 1.5V, 1.8V, 2.5V, 2.6V, 2.7V, 2.8V,
2.85V, 3V, 3.3V, 4.5V (MAX8840/MAX8841) and
Adjustable (MAX8842)
♦ Low 40µA Ground Current
♦ Excellent Load/Line Transient
♦ Overcurrent and Thermal Protection
Ordering Information
PART*
MAX8840ELTxy+T
TEMP RANGE
-40°C to +85°C
PIN-PACKAGE
6 µDFN-6
1.5mm x 1.0mm
MAX8841ELTxy+T**
-40°C to +85°C
6 µDFN-6
1.5mm x 1.0mm
MAX8842ELT+T**
-40°C to +85°C ^{6 µDFN-6}
1.5mm x 1.0mm
*xy is the output voltage code (see the Output Voltage Selector
Guide). Other versions between 1.5V and 4.5V are available in
100mV increments. Contact factory for other versions.
**Future product—contact factory for availability.
+Denotes lead-free package.
Output Voltage Selector Guide appears at end of data sheet.
Pin Configuration
INPUT
2V TO 6V
C_IN
1μF
ON
OFF
IN
OUT
MAX8840
BP
SHDN
GND
OUTPUT PRESET
1 5V TO 4 5V
C_BP
10nF
C_OUT
1μF
Typical Operating Circuits continued at end of data sheet.
TOP VIEW
IN ¹
6 OUT
GND 2
SHDN 3
MAX8840
MAX8841
MAX8842
5 N.C.
BP (MAX8840)
4 N.C. (MAX8841)
FB (MAX8842)
μDFN
(1.5mm x 1.0mm)
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.