MAX8804_08 Datasheet, PDF (1/16 Pages) Maxim Integrated Products – High-Voltage, Dual-Input, USB/AC Adapter Chargers in 2mm x 3mm TDFN

19-0785; Rev 2; 4/08
EVAALVUAAILTAIOBNLEKIT
High-Voltage, Dual-Input, USB/AC
Adapter Chargers in 2mm x 3mm TDFN
General Description
The MAX8804V/MAX8804W/MAX8804Y/MAX8804Z
intelligent, dual-input, stand-alone, constant-current,
constant-voltage (CCCV), thermally regulated linear
chargers are designed for a single-cell lithium-ion (Li+)
battery. They integrate the current-sense circuit, MOS
pass element, thermal-regulation circuitry, and overvolt-
age protection (OVP), and eliminate the reverse-block-
ing Schottky diode.
The MAX8804V/MAX8804W/MAX8804Z function as
stand-alone chargers to control the charging sequence
from the prequalification state through fast-charge, top-
off charge, and full-charge indication. The MAX8804Y
eliminates the prequalification state to allow startup into a
load without a battery. Proprietary thermal-regulation cir-
cuitry limits the die temperature when fast-charging or
while exposed to high ambient temperatures, allowing
maximum charging current without damaging the IC.
The MAX8804V/MAX8804W/MAX8804Y/MAX8804Z
achieve high flexibility by providing an adjustable DC/USB
fast-charge current through a simple single-wire interface
(SET input). The chargers automatically select between
either a USB or AC adapter input source. The AC adapter
charge current is programmable from 400mA to 700mA in
50mA steps through a serial interface. The USB charge
current is programmable to 95mA, 380mA, or 475mA
through the same interface. Other features include an
active-low battery charging-status indicator (CHG), an
active-low power-OK indicator (POK), an active-low USB
input detection output (USBPWR) on the MAX8804Y/
MAX8804Z, and battery pack detection (DETBAT) on the
MAX8804V/MAX8804W.
The MAX8804V has 120mA, 140mA, 180mA, and
200mA CHG top-off threshold settings, while the
MAX8804W/MAX8804Y/MAX8804Z have 70mA, 80mA,
90mA, and 100mA.
The MAX8804V/MAX8804W/MAX8804Y/MAX8804Z
accept a 4.15V to 30V DC source voltage or a 4.15V to
16V USB input voltage, but disable charging when
either input voltage exceeds 7.5V to protect against
unqualified or faulty input sources. The MAX8804V/
MAX8804W/MAX8804Y/MAX8804Z operate over the
extended temperature range (-40°C to +85°C) and are
available in a tiny 8-pin thermally enhanced 2mm x
3mm TDFN package.
Applications
Cell Phones/Smartphones MP3 Players
Digital Cameras
Other Handheld Devices
Portable Media Players
Features
♦ Complete Chargers for Single-Cell Li+ Battery
♦ Dual-Input, 30V AC Adapter/16V USB
♦ No External FET, Blocking Diode, or Sense
Resistor Required
♦ Automatic USB/AC Adapter Input Selection
♦ Easy Programmable Fast-Charge Current and
Top-Off Threshold
♦ Proprietary Die Temperature Regulation Control
♦ ±5% Fast-Charge Current-Limit Accuracy
♦ Battery Pack Detection Input
(MAX8804V/MAX8804W)
♦ Power-Present and Charger-Status Outputs
♦ No Prequalification Charge (MAX8804Y)
♦ Tiny 2mm x 3mm Thermally Enhanced TDFN
Package
Ordering Information
PART
PIN-
PACKAGE
TOP
MARK
MAX8804VETA+
MAX8804WETA+
8 TDFN-EP*
8 TDFN-EP*
AAQ
AAP
MAX8804YETA+
8 TDFN-EP*
AAD
MAX8804ZETA+
8 TDFN-EP*
AAC
*EP = Exposed paddle.
+Denotes a lead-free package.
Note: All devices are specified to operate over the -40°C to
+85°C operating temperature range.
Typical Application Circuit
+3.3V
AC
ADAPTER
1μF
USB
PORT
1μF
DC
MAX8804V CHG
GND
MAX8804W
MAX8804Y
POK
MAX8804Z
USB
<USBPWR>
(DETBAT)
ENABLE/DISABLE
AND PROGRAMMING
SET
BAT
2.2μF
Li+
NOTE: () FOR MAX8804V/MAX8804W, < > FOR MAX8804Y/MAX8804Z
Pin Configuration appears at end of data sheet.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim's website at www.maxim-ic.com.