English
Language : 

MAX8600A Datasheet, PDF (1/12 Pages) Maxim Integrated Products – Single-Input 1-Cell Li+ Charger with OVP Protection and Programmable Charge Timer
19-3205; Rev 1; 1/09
EVAALVUAAILTAIOBNLEKIT
Single-Input 1-Cell Li+ Charger with
OVP Protection and Programmable Charge Timer
General Description
The MAX8600A single-input linear battery charger safe-
ly charges single-cell Li+ batteries. Charging is opti-
mized for Li+ cells using a control algorithm that
includes low-battery precharging, voltage and current-
limited fast-charging, and top-off charging, while con-
tinuously monitoring the battery for overvoltage,
over/under temperature, and charging time. Charger
timeout protection is programmable, and the status is
indicated by three open-drain outputs.
The MAX8600A linear charger optimizes charging time
by adjusting the charge rate to accommodate the ther-
mal characteristics of a given application. There is no
need to reduce the maximum charge current to accom-
modate worst-case charger power dissipation.
The MAX8600A is a variation of the MAX8600 with
improved dropout and other spec changes. See
Maxim’s website for an outline of MAX8600/MAX8600A
differences.
The MAX8600A is available in a 3mm x 3mm power-
enhanced TDFN package.
Cell Phones
Digital Cameras
PDAs
GPS
Applications
Portable Media Players
MP3 Players
Wireless Appliances
Pin Configuration
Features
♦ Low Dropout -0.188V at 0.75A
♦ Up to 1A Programmable Fast-Charge
♦ 5% Charge-Current Accuracy
♦ Logic-Low Enable Input
♦ 14V Input Overvoltage Protection
♦ Programmable On-Chip Charge Timer
♦ Battery Thermistor Input
♦ Three Charger-Status Outputs
♦ Thermally Optimized Charge Rate
♦ 14-Pin, 3mm x 3mm TDFN Package
Ordering Information
PART
TEMP RANGE PIN-PACKAGE TOP
MARK
14 TDFN-EP*
MAX8600AETD+ -40°C to +85°C (3mm x 3mm) AEF
(T1433-2)
*EP = Exposed pad.
+Denotes a lead(Pb)-free/RoHS-compliant package.
Typical Operating Circuit
TOP VIEW
+
BAT 1
SETI 2
THM 3
GND 4
CT 5
N.C. 6
BAT 7
MAX8600A
TDFN
14 FLT
13 DC
12 DC
11 CHG
10 POK
9 DC
8 EN
DC INPUT
4.1V TO 5.9V
OFF
ON
DC
POK
MAX8600A
EN
CHG
CT
FLT
BAT
SETI
THM
GND
SAFE DC
LOGIC
SUPPLY
LED
+
Li+
________________________________________________________________ Maxim Integrated Products 1
For information on other Maxim products, visit Maxim’s website at www.maxim-ic.com.