MAX8550_13 Datasheet, PDF (1/29 Pages) Maxim Integrated Products – Integrated DDR Power-Supply Solutions for Desktops, Notebooks, and Graphic Cards

EVALUATION KIT AVAILABLE
MAX8550/MAX8551
Integrated DDR Power-Supply Solutions for
Desktops, Notebooks, and Graphic Cards
General Description
The MAX8550/MAX8551 integrate a synchronous-buck
PWM controller to generate V_DDQ, a sourcing and sinking
LDO linear regulator to generate V_TT, and a 10mA refer-
ence output buffer to generate V_TTR. The buck controller
drives two external N-channel MOSFETs to generate out-
put voltages down to 0.7V from a 2V to 28V input with out-
put currents up to 15A. The LDO can sink or source up to
1.5A continuous and 3A peak current. Both the LDO out-
put and the 10mA reference buffer output can be made
to track the REFIN voltage. These features make the
MAX8550/MAX8551 ideally suited for DDR memory appli-
cations in desktops, notebooks, and graphic cards.
The PWM controller in the MAX8550/MAX8551 utilizes
Maxim’s proprietary Quick-PWM™ architecture with pro-
grammable switching frequencies of up to 600kHz. This
control scheme handles wide input/output voltage ratios
with ease and provides 100ns response to load tran-
sients while maintaining high efficiency and a relatively
constant switching frequency. The MAX8550 offers fully
programmable UVP/OVP and skip-mode options ideal in
portable applications. Skip mode allows for improved
efficiency at lighter loads. The MAX8551, which is tar-
geted towards desktop and graphic-card applications,
does not offer the pulse-skip feature.
The VTT and VTTR outputs track to within 1% of V_REFIN / 2.
The high bandwidth of this LDO regulator allows excel-
lent transient response without the need for bulk capac-
itors, thus reducing cost and size.
The buck controller and LDO regulators are provided with
independent current limits. Adjustable lossless foldback
current limit for the buck regulator is achieved by monitor-
ing the drain-to-source voltage drop of the low-side MOS-
FET. Additionally, overvoltage and undervoltage
protection mechanisms are built in. Once the overcurrent
condition is removed, the regulator is allowed to enter
soft-start again. This helps minimize power dissipation
during a short-circuit condition. The MAX8550/MAX8551
allow flexible sequencing and standby power manage-
ment using the SHDNA, SHDNB, and STBY inputs.
Both the MAX8550 and MAX8551 are available in a
small 5mm × 5mm, 28-pin thin QFN package.
Applications
DDR I and DDR II Memory Power Supplies
Desktop Computers
Notebooks and Desknotes
Graphic Cards
Game Consoles
RAID
Networking
Features
Buck Controller
o Quick-PWM with 100ns Load-Step Response
o Up to 95% Efficiency
o 2V to 28V Input Voltage Range
o 1.8V/2.5V Fixed or 0.7V to 5.5V Adjustable Output
o Up to 600kHz Selectable Switching Frequency
o Programmable Current Limit with Foldback
Capability
o 1.7ms Digital Soft-Start and Independent
Shutdown
o Overvoltage/Undervoltage-Protection Option
o Power-Good Window Comparator
LDO Section
o Fully Integrated VTT and VTTR Capability
o VTT has ±3A Sourcing/Sinking Capability
o VTT and VTTR Outputs Track V_REFIN / 2
o All-Ceramic Output-Capacitor Designs
o 1.0V to 2.8V Input Voltage Range
o Power-Good Window Comparator
Ordering Information
PART
TEMP RANGE PIN-PACKAGE
MAX8550ETI
-40°C to +85°C 28 5mm × 5mm TQFN
MAX8550ETI+ -40°C to +85°C 28 5mm × 5mm TQFN
MAX8551ETI
-40°C to +85°C 28 5mm × 5mm TQFN
MAX8551ETI+ -40°C to +85°C 28 5mm × 5mm TQFN
+Denotes a lead(Pb)-free/RoHS-compliant package.
Pin Configuration
TOP VIEW
+
TON 1
OVP/UVP
(N.C. FOR ²
MAX8551)
REF ³
ILIM 4
POK1 5
POK2 6
STBY 7
MAX8550
MAX8551
21 DL
20 BST
19 LX
18 DH
17 V_IN
16 OUT
15 FB
5mm x 5mm Thin QFN
Typical Operating Circuit appears at end of data sheet.
Quick-PWM is a trademark of Maxim Integrated Products, Inc.
For pricing, delivery, and ordering information, please contact Maxim Direct
at 1-888-629-4642, or visit Maxim’s website at www.maximintegrated.com.
19-3173; Rev 3; 4/13