MAX817L_05 Datasheet, PDF (1/16 Pages) Maxim Integrated Products – +5V Microprocessor Supervisory Circuits

19-0486; Rev 3; 12/05
+5V Microprocessor Supervisory Circuits
General Description
The MAX817/MAX818/MAX819 microprocessor (µP)
supervisory circuits simplify power-supply monitoring,
battery control, and chip-enable gating in µP systems
by reducing the number of components required.
These devices are designed for use in +5V-powered
systems. Low supply current (11µA typical) and small
package size make these devices ideal for portable
applications. The MAX817/MAX818/MAX819 are specif-
ically designed to ignore fast transients on V_CC. Other
supervisory functions include active-low reset, backup-
battery switchover, watchdog input, battery freshness
seal, and chip-enable gating. The Selector Guide below
lists the specific functions available from each device.
These devices offer two pretrimmed reset threshold volt-
ages for ±5% or ±10% power supplies: 4.65V for the L
versions and 4.40V for the M versions. The MAX817/
MAX818/MAX819 are available in space-saving µMAX
packages, as well as 8-pin DIP/SO.
_____________________Selector Guide
FEATURE
Active-Low Reset
Backup-Battery Switchover
Power-Fail Comparator
Watchdog Input
Battery Freshness Seal
Manual Reset Input
Chip-Enable Gating
MAX817
L/M
✔
✔
✔
✔
✔
—
—
MAX818
L/M
✔
✔
—
✔
✔
—
✔
MAX819
L/M
✔
✔
✔
—
✔
✔
—
Pin-Package
8-DIP/SO/ 8-DIP/SO/ 8-DIP/SO/
µMAX µMAX µMAX
Low-Power, Pin-
MAX690A/
Compatible Upgrades for: MAX692A
—
MAX703/
MAX704
________________________Applications
Battery-Powered Computers and Controllers
Embedded Controllers
Intelligent Instruments
Critical µP Monitoring
Portable Equipment
____________________________Features
♦ Precision Supply-Voltage Monitor:
4.65V (MAX81_L)
4.40V (MAX81_M)
♦ 11µA Quiescent Supply Current
♦ 200ms Reset Time Delay
♦ Watchdog Timer with 1.6sec Timeout
(MAX817/MAX818)
♦ Battery-Backup Power Switching; Battery Voltage
Can Exceed V_CC
♦ Battery Freshness Seal
♦ On-Board, 3ns Gating of Chip-Enable Signals
(MAX818)
♦ Uncommitted Voltage Monitor for Power-Fail or
Low-Battery Warning (MAX817/MAX819)
♦ Manual Reset Input (MAX819)
______________Ordering Information
PART^†
TEMP. RANGE PIN-PACKAGE
MAX817_CPA
0°C to +70°C
8 Plastic DIP
MAX817_CSA
0°C to +70°C
8 SO
MAX817_CUA
0°C to +70°C
8 µMAX
Ordering Information continued on last page.
†_{These parts offer a choice of reset threshold voltage. From the}
table below, select the suffix corresponding to the desired
threshold and insert it into the blank to complete the part number.
Devices are available in both leaded and lead-free packaging.
Specify lead free by adding the + symbol at the end of the part
number when ordering.
SUFFIX
RESET THRESHOLD (V)
L
4.65
M
4.40
_________________Pin Configurations
TOP VIEW
OUT 1
V_CC 2
GND 3
PFI 4
MAX817
8 BATT
7 RESET
6 WDI
5 PFO
Typical Operating Circuit appears at end of data sheet.
*P
DIP/SO/µMAX
Pin Configurations continued at end of data sheet.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.