MAX812LEUS-T Datasheet, PDF (1/8 Pages) Maxim Integrated Products – 4-Pin μP Voltage Monitors with Manual Reset Input

19-0411; Rev 4; 12/05
4-Pin µP Voltage Monitors
with Manual Reset Input
________________General Description
The MAX811/MAX812 are low-power microprocessor
(µP) supervisory circuits used to monitor power sup-
plies in µP and digital systems. They provide excellent
circuit reliability and low cost by eliminating external
components and adjustments when used with 5V-
powered or 3V-powered circuits. The MAX811/MAX812
also provide a debounced manual reset input.
These devices perform a single function: They assert a
reset signal whenever the V_CC supply voltage falls
below a preset threshold, keeping it asserted for at
least 140ms after V_CC has risen above the reset thresh-
old. The only difference between the two devices is that
the MAX811 has an active-low RESET output (which is
guaranteed to be in the correct state for V_CC down to
1V), while the MAX812 has an active-high RESET out-
put. The reset comparator is designed to ignore fast
transients on V_CC. Reset thresholds are available for
operation with a variety of supply voltages.
Low supply current makes the MAX811/MAX812 ideal
for use in portable equipment. The devices come in a
4-pin SOT143 package.
________________________Applications
Computers
Controllers
Intelligent Instruments
Critical µP and µC Power Monitoring
Portable/Battery-Powered Equipment
___________Typical Operating Circuit
V_CC
V_CC
MAX811
MAX812
RESET
MR
(RESET)
GND
V_CC
μP
RESET
INPUT
GND
PUSHBUTTON
SWITCH
( ) ARE FOR MAX812
____________________________Features
♦ Precision Monitoring of 3V, 3.3V, and 5V
Power-Supply Voltages
♦ 6µA Supply Current
♦ 140ms Min Power-On Reset Pulse Width;
RESET Output (MAX811), RESET Output (MAX812)
♦ Guaranteed Over Temperature
♦ Guaranteed RESET Valid to V_CC = 1V (MAX811)
♦ Power-Supply Transient Immunity
♦ No External Components
♦ 4-Pin SOT143 Package
_______________Ordering Information
PART*
TEMP RANGE PIN-PACKAGE
MAX811_EUS-T -40°C to +85°C 4 SOT143
MAX812_EUS-T -40°C to +85°C 4 SOT143
*This part offers a choice of five different reset threshold volt-
ages. Select the letter corresponding to the desired nominal
reset threshold voltage, and insert it into the blank to complete
the part number.
Devices are available in both leaded and lead-free packaging.
Specify lead-free by replacing “-T” with “+T” when ordering.
RESET THRESHOLD
SUFFIX
VOLTAGE (V)
L
4.63
M
4.38
T
3.08
S
2.93
R
2.63
___________________Pin Configuration
TOP VIEW
GND 1
4 V_CC
MAX811
MAX812
(RESET) RESET 2
3 MR
SOT143
( ) ARE FOR MAX812
NOTE: SEE LAST PAGE FOR MARKING INFORMATION.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.