MAX7377 Datasheet, PDF (1/9 Pages) Maxim Integrated Products – Silicon Oscillator with Low-Power Frequency Switching

19-3474; Rev 0; 10/04
Silicon Oscillator with Low-Power
Frequency Switching
General Description
The MAX7377 dual-speed silicon oscillator with reset is
a replacement for ceramic resonators, crystals, crystal
oscillator modules, and discrete reset circuits. The
device provides the primary and secondary clock
source for microcontrollers in 3V, 3.3V, and 5V applica-
tions. The MAX7377 features a factory-programmed
high-speed oscillator, a 32.768kHz oscillator, and a
clock selector input. The clock output can be switched
at any time between the high-speed clock and the
32.768kHz clock for low-power operation. Switchover is
synchronized internally to provide glitch-free clock
switching.
Unlike typical crystal and ceramic resonator oscillator
circuits, the MAX7377 is resistant to vibration and EMI.
The high-output-drive current and absence of high-
impedance nodes make the oscillator less susceptible
to dirty or humid operating conditions. With a wide
operating temperature range as standard, the MAX7377
is a good choice for demanding home appliance,
industrial, and automotive environments.
The MAX7377 is available in factory-programmed fre-
quencies from 32.768kHz to 10MHz. See Table 1 for
standard frequencies and contact the factory for cus-
tom frequencies.
The MAX7377 is available in a 5-pin SOT23 package.
Refer to the MAX7383 data sheet for frequencies
≥10MHz. The MAX7377 standard operating tempera-
ture range is -40°C to +125°C. See the Applications
Information section for the extended operating temper-
ature range.
Features
♦ 2.7V to 5.5V Operation
♦ Accurate High-Speed 600kHz to 10MHz Oscillator
♦ Accurate Low-Speed 32kHz Oscillator
♦ Glitch-Free Switch Between High Speed and Low
Speed at Any Time
♦ ±10mA Clock-Output Drive Capability
♦ 2% Initial Accuracy
♦ ±50ppm/°C Temperature Coefficient
♦ 50% Duty Cycle
♦ 5ns Output Rise and Fall Time
♦ Low Jitter: 160ps_(P-P) at 8MHz (No PLL)
♦ 3mA Fast-Mode Operating Current (8MHz)
♦ 13µA Slow-Mode Operating Current (32kHz)
♦ -40°C to +125°C Temperature Range
Ordering Information
PART
TEMP RANGE PIN-PACKAGE
MAX7377AX_ _-T
-40°C to +125°C 5 SOT23-5
The first two letters are AX. See Table 1 at the end of the data
sheet for the two-letter code.
Applications
White Goods
Handheld Products
Automotive
Portable Equipment
Consumer Products
Microcontroller Systems
Appliances and Controls
TOP VIEW
Pin Configuration
CLOCK 1
5 E.C.
MAX7377
GND 2
Typical Application Circuit appears at end of data sheet.
SPEED 3
4 V_CC
SOT23
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.