MAX7219_07 Datasheet, PDF (1/16 Pages) Maxim Integrated Products – Serially Interfaced, 8-Digit LED Display Drivers

19-4452; Rev 4; 7/03
Serially Interfaced, 8-Digit LED Display Drivers
General Description
The MAX7219/MAX7221 are compact, serial input/out-
put common-cathode display drivers that interface
microprocessors (µPs) to 7-segment numeric LED dis-
plays of up to 8 digits, bar-graph displays, or 64 indi-
vidual LEDs. Included on-chip are a BCD code-B
decoder, multiplex scan circuitry, segment and digit
drivers, and an 8x8 static RAM that stores each digit.
Only one external resistor is required to set the seg-
ment current for all LEDs. The MAX7221 is compatible
with SPI™, QSPI™, and MICROWIRE™, and has slew-
rate-limited segment drivers to reduce EMI.
A convenient 4-wire serial interface connects to all
common µPs. Individual digits may be addressed and
updated without rewriting the entire display. The
MAX7219/MAX7221 also allow the user to select code-
B decoding or no-decode for each digit.
The devices include a 150µA low-power shutdown
mode, analog and digital brightness control, a scan-
limit register that allows the user to display from 1 to 8
digits, and a test mode that forces all LEDs on.
For applications requiring 3V operation or segment
blinking, refer to the MAX6951 data sheet.
Applications
Bar-Graph Displays
Panel Meters
Industrial Controllers
LED Matrix Displays
Pin Configuration
Features
o 10MHz Serial Interface
o Individual LED Segment Control
o Decode/No-Decode Digit Selection
o 150µA Low-Power Shutdown (Data Retained)
o Digital and Analog Brightness Control
o Display Blanked on Power-Up
o Drive Common-Cathode LED Display
o Slew-Rate Limited Segment Drivers
for Lower EMI (MAX7221)
o SPI, QSPI, MICROWIRE Serial Interface (MAX7221)
o 24-Pin DIP and SO Packages
Ordering Information
PART
TEMP RANGE PIN-PACKAGE
MAX7219CNG 0°C to +70°C 24 Narrow Plastic DIP
MAX7219CWG 0°C to +70°C 24 Wide SO
MAX7219C/D
0°C to +70°C Dice*
MAX7219ENG -40°C to +85°C 24 Narrow Plastic DIP
MAX7219EWG -40°C to +85°C 24 Wide SO
MAX7219ERG -40°C to +85°C 24 Narrow CERDIP
Ordering Information continued at end of data sheet.
*Dice are specified at T_A = +25°C.
Typical Application Circuit
TOP VIEW
DIN 1
DIG 0 2
DIG 4 3
GND 4
DIG 6 5
DIG 2 6
DIG 3 7
DIG 7 8
GND 9
DIG 5 10
DIG 1 11
LOAD (CS) 12
MAX7219
MAX7221
24 DOUT
23 SEG D
22 SEG DP
21 SEG E
20 SEG C
19 V+
18 ISET
17 SEG G
16 SEG B
15 SEG F
14 SEG A
13 CLK
MOSI
µP I/O
SCK
+5V
9.53k
18
1
12
19
V+
I_SET
DIG 0–DIG 7
MAX7219
DIN _MAX7221
LOAD (CS)
8 DIGITS
13 _CLK
9 _GND
SEG A–G,
SEG DP _{8 SEGMENTS}
GND
4
( ) MAX7221 ONLY
DIP/SO
( ) MAX7221 ONLY
8-DIGIT µP DISPLAY
SPI and QSPI are trademarks of Motorola Inc. MICROWIRE is a trademark of National Semiconductor Corp.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.