English
Language : 

MAX7033_11 Datasheet, PDF (1/15 Pages) Maxim Integrated Products – 315MHz/433MHz ASK Superheterodyne Receiver with AGC Lock
19-3273; Rev 2; 1/11
315MHz/433MHz ASK Superheterodyne
Receiver with AGC Lock
General Description
The MAX7033 fully integrated low-power CMOS super-
heterodyne receiver is ideal for receiving amplitude-
shift-keyed (ASK) data in the 300MHz to 450MHz
frequency range. The receiver has an RF input signal
range of -114dBm to 0dBm. With few external compo-
nents and a low-current power-down mode, it is ideal
for cost-sensitive and power-sensitive applications typi-
cal in the automotive and consumer markets. The
MAX7033 consists of a low-noise amplifier (LNA), a fully
differential image-rejection mixer, an on-chip phase-
locked loop (PLL) with integrated voltage-controlled
oscillator (VCO), a 10.7MHz IF limiting amplifier stage
with received-signal-strength indicator (RSSI), and ana-
log baseband data-recovery circuitry. The MAX7033
also has a discrete one-step automatic gain control
(AGC) that reduces the LNA gain by 35dB when the RF
input signal exceeds -62dBm. The AGC circuitry offers
an externally controlled hold feature.
The MAX7033 is available in 28-pin TSSOP and
32-pin TQFN packages and is specified over the
extended (-40°C to +105°C) temperature range.
Applications
Automotive Remote
Keyless Entry
Security Systems
Garage Door Openers
Home Automation
Remote Controls
Local Telemetry
Wireless Sensors
Typical Application Circuit appears at end of data sheet.
Features
o Optimized for 315MHz or 433MHz Band
o Operates from Single +3.3V or +5.0V Supplies
o High Dynamic Range with On-Chip AGC
o AGC Hold Circuit
o 1ms AGC Release Time
o Selectable Image-Rejection Center Frequency
o Selectable x64 or x32 fLO/fXTAL Ratio
o Low 5.2mA Operating Supply Current
o < 3.5µA Low-Current Power-Down Mode for
Efficient Power Cycling
o 250µs Startup Time
o Built-In 44dB RF Image Rejection
o Better than -114dBm Receive Sensitivity
o -40°C to +105°C Operation
Ordering Information
PART
MAX7033EUI+
MAX7033ETJ+
TEMP RANGE
-40°C to +105°C
-40°C to +105°C
PIN-PACKAGE
28 TSSOP
32 TQFN-EP*
+Denotes a lead(Pb)-free/RoHS-compliant package.
*EP = Exposed pad.
Pin Configurations
TOP VIEW
+
XTAL1 1
AVDD 2
LNAIN 3
LNASRC 4
AGND 5
LNAOUT 6
MAX7033
AVDD 7
MIXIN1 8
MIXIN2 9
AGND 10
IRSEL 11
MIXOUT 12
DGND 13
DVDD 14
TSSOP
28 XTAL2
27 SHDN
26 PDOUT
25 DATAOUT
24 VDD5
23 DSP
22 DFFB
21 OPP
20 DSN
19 DFO
18 IFIN2
17 IFIN1
16 XTALSEL
15 AC
N.C. 1
+
AGND 2
LNAOUT 3
AVDD 4
MIXIN1 5
MIXIN2 6
AGND 7
IRSEL 8
MAX7033
24 DATAOUT
23 VDD5
22 DSP
21 N.C.
20 DFFB
19 OPP
18 DSN
17 DFO
TQFN
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.