MAX6955_15 Datasheet, PDF (1/40 Pages) Maxim Integrated Products – 2-Wire Interfaced, 2.7V to 5.5V LED Display Driver with I/O Expander and Key Scan

MAX6955
EVALUATION KIT AVAILABLE
2-Wire Interfaced, 2.7V to 5.5V
LED Display Driver with I/O
Expander and Key Scan
General Description
The MAX6955 is a compact display driver that interfaces
microprocessors to a mix of 7-segment, 14-segment,
and 16-segment LED displays through an I²C-compati-
ble 2-wire serial interface. The MAX6955 drives up to 16
digits 7-segment, 8 digits 14-segment, 8 digits 16-seg-
ment, or 128 discrete LEDs, while functioning from a
supply voltage as low as 2.7V. The driver includes five
I/O expander or general-purpose I/O (GPIO) lines, some
or all of which can be configured as a key-switch reader.
The key-switch reader automatically scans and
debounces a matrix of up to 32 switches.
Included on chip are full 14- and 16-segment ASCII
104-character fonts, a hexadecimal font for 7-segment
displays, multiplex scan circuitry, anode and cathode
drivers, and static RAM that stores each digit. The max-
imum segment current for the display digits is set using
a single external resistor. Digit intensity can be inde-
pendently adjusted using the 16-step internal digital
brightness control. The MAX6955 includes a low-power
shutdown mode, a scan-limit register that allows the
user to display from 1 to 16 digits, segment blinking
(synchronized across multiple drivers, if desired), and a
test mode, which forces all LEDs on. The LED drivers
are slew-rate limited to reduce EMI.
For an SPI-compatible version, refer to the MAX6954
data sheet. An evaluation kit (EV kit) for the MAX6955 is
available.
Applications
Set-Top Boxes
Panel Meters
White Goods
Bar Graph Displays
Audio/Video Equipment
Ordering Information
PART
TEMP RANGE
PIN-PACKAGE
MAX6955AAX+
-40°C to +125°C 36 SSOP
MAX6955ATL+
-40°C to +125°C 40 TQFN-EP*
*EP = Exposed pad.
+Denotes a lead(Pb)-free/RoHS-compliant package.
Pin Configurations and Typical Operating Circuits appear
at end of data sheet.
Benefits and Features
• Simplifies Driving 5 x 7 Matrix LED Displays
• Drives Common-Cathode Monocolor and Bicolor
LED Displays
• Drives Up to 16 Digits 7-Segment, 8 Digits 14-Segment,
8 Digits 16-Segment, 128 Discrete LEDs, or a
Combination of Digit Types
• 2.7V to 5.5V Operation
• Standard 2-Wire Interface Supports a Variety of
Microprocessor Architectures
• 400kbps 2-Wire I²C-Compatible Interface
• Integrated Flexibility Supports Different Application
Requirements
• Built-In ASCII 104-Character Font for 14-Segment
and 16-Segment Digits and Hexadecimal Font for
7-Segment Digits
• 16-Step Digit-by-Digit Digital Brightness Control
• Display Blanked on Power-Up
• Automatic Blinking Control for Each Segment
• 10µA (typ) Low-Power Shutdown (Data Retained)
• Five GPIO Port Pins Can Be Configured as Key-Switch
Reader to Scan and Debounce Up to 32 Switches with
n-Key Rollover
• IRQ Output when a Key Input Is Debounced
• Slew-Rate-Limited Segment Drivers for Lower EMI
• 36-Pin SSOP and 40-Pin DIP and TQFN Packages
• Automotive Temperature Range Standard Covers
Usage in Harsh Environments
Functional Diagram
ISET
CURRENT
SOURCE
OSC
OSC_OUT
DIVIDER/
COUNTER
NETWORK
GPIO
AND KEY-SCAN
CONTROL
PWM
BRIGHTNESS
CONTROL
DIGIT
MULTIPLEXER
P0 TO P4/IRQ
LED
DRIVERS
O0 TO O18
MAX6955
CHARACTER
GENERATOR
ROM
BLINK
BLINK
CONTROL
CONFIGURATION
RAM
REGISTER
SCL
AD0
2-WIRE SERIAL INTERFACE
AD1
SDA
19-2548; Rev 4; 7/15