MAX6821_05 Datasheet, PDF (1/9 Pages) Maxim Integrated Products – Low-Voltage SOT23 uP Supervisors with Manual Reset and Watchdog Timer

19-1868; Rev 2; 12/05
Low-Voltage SOT23 µP Supervisors with
Manual Reset and Watchdog Timer
General Description
The MAX6821–MAX6825 are low-voltage microprocessor
(µP) supervisory circuits that combine voltage monitor-
ing, watchdog timer, and manual reset input functions in
a 5-pin SOT23 package. Microprocessor supervisory cir-
cuits significantly improve system reliability and accura-
cy compared to separate ICs or discrete components.
These devices assert a reset signal whenever the moni-
tored voltage drops below its preset threshold, keeping it
asserted for a minimum timeout period after V_CC rises
above the threshold. In addition, a watchdog timer moni-
tors against code execution errors. A debounced manual
reset is also available. The MAX6821–MAX6825 monitor
voltages from +1.8V to +5.0V. These outputs are guaran-
teed to be in the correct state for V_CC down to +1.0V.
Nine preprogrammed reset threshold voltages are
available (see the Threshold Suffix Guide). The
MAX6821, MAX6822, and MAX6823 all have a manual
reset input and a watchdog timer. The MAX6821 has
push-pull RESET, the MAX6822 has open-drain RESET,
and the MAX6823 has push-pull RESET. The MAX6824
has a watchdog timer and both push-pull RESET and
push-pull RESET. The MAX6825 has a manual reset
input and both push-pull RESET and push-pull RESET.
The Selector Guide explains the functions offered in
this series of parts.
________________________Applications
Set-Top Boxes
Computers and
Controllers
Embedded Controllers
Intelligent Instruments
Automotive Systems
Critical µP Monitoring
Portable/Battery-
Powered Equipment
TOP VIEW
Pin Configurations
RESET(RESET) 1
5 V_CC
GND 2
MR 3
MAX6821
MAX6822
MAX6823
4 WDI
(RESET) MAX6821 ONLY
SOT23-5
Pin Configurations continued at end of data sheet.
Typical Operating Circuit appears at end of data sheet.
Features
o Monitors +1.8V, +2.5V, +3.0V, +3.3V, +5.0V
Supplies
o 140ms (min) Reset Timeout Delay
o 1.6s Watchdog Timeout Period
(MAX6821/MAX6822/MAX6823/MAX6824)
o Manual Reset Input
(MAX6821/MAX6822/MAX6823/MAX6825)
o Three Reset Output Options
Push-Pull RESET
Push-Pull RESET
Open-Drain RESET
o Guaranteed Reset Valid to V_CC = +1.0V
o Immune to Short Negative V_CC Transients
o No External Components
o Small 5-Pin SOT23 Packages
Ordering Information
PART*
TEMP RANGE
PIN-PACKAGE
MAX6821_UK-T -40°C to +125°C
5 SOT23-5
MAX6822_UK-T -40°C to +125°C
5 SOT23-5
MAX6823_UK-T -40°C to +125°C
5 SOT23-5
MAX6824_UK-T
MAX6825_UK-T
-40°C to +125°C
-40°C to +125°C
5 SOT23-5
5 SOT23-5
*Insert the desired suffix letter (from the table below) into the blank
to complete the part number
Devices are available in both leaded and lead-free packaging.
Specify lead-free by replacing “-T” with “+T” when ordering.
Threshold Suffix Guide
SUFFIX
RESET
THRESHOLD (V)
L
4.63
M
4.38
T
3.08
S
2.93
R
2.63
Z
2.32
Y
2.19
W
1.67
V
1.58
Note: Bold indicates standard versions. Samples are typically
available for standard versions only. All parts require a 2.5k
minimum order increment. Contact factory for availability.
Selector Guide appears at end of data sheet.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.