MAX6697 Datasheet, PDF (1/19 Pages) Maxim Integrated Products – 7-Channel Precision Temperature Monitor

19-3477; Rev 0; 1/05
7-Channel Precision Temperature Monitor
General Description
The MAX6697 precision multichannel temperature sen-
sor monitors its own temperature and the temperatures
of up to six external diode-connected transistors. All
temperature channels have programmable alert thresh-
olds. Channels 1, 4, 5, and 6 also have programmable
overtemperature thresholds. When the measured tem-
perature of a channel exceeds the respective thresh-
old, a status bit is set in one of the status registers. Two
open-drain outputs, OVERT and ALERT, assert corre-
sponding to these bits in the status register.
The 2-wire serial interface supports the standard system
management bus (SMBus™) protocols: write byte, read
byte, send byte, and receive byte for reading the tem-
perature data and programming the alarm thresholds.
The MAX6697 is specified for an operating temperature
range of -40°C to +125°C and is available in 20-pin
QSOP and 20-pin TSSOP packages.
Applications
Desktop Computers
Notebook Computers
Workstations
Servers
Features
o Six Thermal-Diode Inputs
o Local Temperature Sensor
o 1°C Remote Temperature Accuracy (+60°C to
+100°C)
o Temperature Monitoring Begins at POR for Fail-
Safe System Protection
o ALERT and OVERT Outputs for Interrupts,
Throttling, and Shutdown
o Small 20-Pin QSOP and 20-Pin TSSOP Packages
o 2-Wire SMBus Interface
Ordering Information
PART
TEMP RANGE
MAX6697EP_ _
MAX6697UP_ _
-40°C to +125°C
-40°C to +125°C
*See the Slave Address section.
PIN-PACKAGE
20 QSOP
20 TSSOP
SMBus is a trademark of Intel Corp.
CPU
Pin Configuration appears at end of data sheet.
Typical Application Circuit
+3.3V
2200pF
1 _DXP1
2 _DXN1
GND ²⁰
MAX6697 _SMBCLK 19
3 _DXP2
2200pF
4 _DXN2
SMBDATA ¹⁸
ALERT ¹⁷
5 _DXP3
2200pF
6 _DXN3
V_CC ¹⁶
OVERT ¹⁵
7 _DXP4
2200pF
8 _DXN4
NC1 ¹⁴
NC2 ¹³
9 _DXP5
2200pF
10 _DXN5
DXN6 ¹²
DXP6 ¹¹
4.7kΩ
EACH
CLK
DATA
INTERRUPT
TO µP
0.1µF
TO SYSTEM
SHUTDOWN
GPU
2200pF
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.