MAX6602_07 Datasheet, PDF (1/18 Pages) Maxim Integrated Products – Five-Channel Precision Temperature Monitor

19-0620; Rev 1; 8/07
Five-Channel Precision Temperature Monitor
General Description
The MAX6602 precision multichannel temperature sen-
sor monitors its own temperature and the temperatures
of up to four external diode-connected transistors. All
temperature channels have programmable alert thresh-
olds. Channels 1 and 4 also have programmable
overtemperature thresholds. When the measured tem-
perature of a channel exceeds the respective thresh-
old, a status bit is set in one of the status registers. Two
open-drain outputs, OVERT and ALERT, assert corre-
sponding to these bits in the status register.
The 2-wire serial interface supports the standard system
management bus (SMBus™) protocols: write byte, read
byte, send byte, and receive byte for reading the tem-
perature data and programming the alarm thresholds.
The MAX6602 is specified for a -40°C to +125°C oper-
ating temperature range and is available in a 16-pin
TSSOP package.
Applications
Desktop Computers
Notebook Computers
Workstations
Servers
SMBus is a trademark of Intel Corp.
Pin Configuration appears at end of data sheet.
Features
♦ Four Thermal-Diode Inputs
♦ Local Temperature Sensor
♦ 1°C Remote Temperature Accuracy (+60°C to +100°C)
♦ Temperature Monitoring Begins at POR for Fail-
Safe System Protection
♦ ALERT and OVERT Outputs for Interrupts,
Throttling, and Shutdown
♦ STBY Input for Hardware Standby Mode
♦ Small, 16-Pin TSSOP Package
♦ 2-Wire SMBus Interface
Ordering Information
PART
PIN-
PACKAGE
SLAVE
ADDRESS
PKG
CODE
MAX6602UE9A+ 16 TSSOP
1001 101
U16-1
Note: This device is specified over the -40°C to +125°C
temperature range.
+Denotes lead-free package.
Typical Application Circuit
+3.3V
CPU
1 _DXP1
2200pF
2 _DXN1
GND ¹⁶
SMBCLK ¹⁵
4.7kΩ
EACH
CLK
3 _DXP2
2200pF
4 _DXN2
MAX6602 _SMBDATA 14
ALERT ¹³
5 _DXP3
2200pF
6 _DXN3
V_CC ¹²
OVERT ¹¹
7 _DXP4
2200pF
8 _DXN4
N.C. ¹⁰
STBY ⁹
0.1μF
DATA
INTERRUPT
TO μP
TO SYSTEM
SHUTDOWN
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.