English
Language : 

MAX6025 Datasheet, PDF (1/14 Pages) Maxim Integrated Products – Precision, Low-Power, Low-Dropout, SOT23-3 Voltage References
19-4777; Rev 3; 4/01
Precision, Low-Power, Low-Dropout,
SOT23-3 Voltage References
General Description
The MAX6012/MAX6021/MAX6025/MAX6030/MAX6041/
MAX6045/MAX6050 precision, low-dropout, micropower
voltage references are available in miniature SOT23-3
surface-mount packages. They feature a proprietary
curvature-correction circuit and laser-trimmed thin-film
resistors that result in a low temperature coefficient of
<15ppm/°C and initial accuracy of better than 0.2%.
These devices are specified over the extended temper-
ature range.
These series-mode voltage references draw only 27µA
of quiescent supply current and can sink or source up
to 500µA of load current. Unlike conventional shunt-
mode (two-terminal) references that waste supply cur-
rent and require an external resistor, devices in the
MAX6012 family offer a supply current that’s virtually
independent of supply voltage (with only a 0.8µA/V vari-
ation with supply voltage) and do not require an external
resistor. Additionally, these internally compensated
devices do not require an external compensation
capacitor and are stable with up to 2.2nF of load capac-
itance. Eliminating the external compensation capacitor
saves valuable board area in space-critical applications.
Their low dropout voltage and supply-independent,
ultra-low supply current make these devices ideal for
battery-operated, low-voltage systems.
Applications
Hand-Held Equipment
Data Acquisition Systems
Industrial and Process-Control Systems
Battery-Operated Equipment
Hard-Disk Drives
Features
o 0.2% (max) Initial Accuracy
o 15ppm/°C (max) Temperature Coefficient
o 35µA (max) Quiescent Supply Current
o 0.8µA/V Supply Current Variation with VIN
o ±500µA Output Source and Sink Current
o 100mV Dropout at 500µA Load Current
o 0.12µV/µA Load Regulation
o 8µV/V Line Regulation
o Stable with CLOAD = 0 to 2.2nF
Ordering Information
PART
TEMP. RANGE
PIN-
PACKAGE
MAX6012AEUR-T -40°C to +85°C 3 SOT23-3
MAX6012BEUR-T -40°C to +85°C
MAX6021AEUR-T -40°C to +85°C
MAX6021BEUR-T -40°C to +85°C
3 SOT23-3
3 SOT23-3
3 SOT23-3
MAX6025AEUR-T -40°C to +85°C
MAX6025BEUR-T -40°C to +85°C
MAX6030AEUR-T -40°C to +85°C
MAX6030BEUR-T -40°C to +85°C
MAX6041AEUR-T -40°C to +85°C
MAX6041BEUR-T -40°C to +85°C
MAX6045AEUR-T -40°C to +85°C
MAX6045BEUR-T -40°C to +85°C
MAX6050AEUR-T -40°C to +85°C
MAX6050BEUR-T -40°C to +85°C
3 SOT23-3
3 SOT23-3
3 SOT23-3
3 SOT23-3
3 SOT23-3
3 SOT23-3
3 SOT23-3
3 SOT23-3
3 SOT23-3
3 SOT23-3
TOP
MARK
FZAP
FZDA
FZAU
FZDF
FZAQ
FZDB
FZDW
FZDX
FZAR
FZDC
FZAS
FZDD
FZAT
FZDE
Selector Guide
Typical Operating Circuit
PART
MAX6012
MAX6021
MAX6025
MAX6030
MAX6041
MAX6045
MAX6050
OUTPUT
VOLTAGE (V)
1.247
2.048
2.500
3.000
4.096
4.500
5.000
INPUT VOLTAGE (V)
2.5 to 12.6
2.5 to 12.6
(VOUT + 200mV) to 12.6
(VOUT + 200mV) to 12.6
(VOUT + 200mV) to 12.6
(VOUT + 200mV) to 12.6
(VOUT + 200mV) to 12.6
Pin Configuration appears at end of data sheet.
+SUPPLY INPUT (SEE SELECTOR GUIDE)
IN
OUT
REFERENCE
MAX6012
OUT
MAX6021
*
MAX6025
MAX6030
MAX6041
MAX6045
MAX6050
GND
2.2nF MAX*
*CAPACITORS ARE OPTIONAL
________________________________________________________________ Maxim Integrated Products 1
For price, delivery, and to place orders, please contact Maxim Distribution at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.