MAX5722 Datasheet, PDF (1/14 Pages) Maxim Integrated Products – 12-Bit, Low-Power, Dual, Voltage-Output DAC with Serial Interface

19-2124; Rev 2; 7/03
12-Bit, Low-Power, Dual, Voltage-Output
DAC with Serial Interface
General Description
The MAX5722 dual,12-bit, low-power, buffered voltage-
output, digital-to-analog converter (DAC) is packaged
in a space-saving 8-pin µMAX package (5mm ✕ 3mm).
The wide supply voltage range of +2.7V to +5.5V and
112µA supply current accommodates low-power and
low-voltage applications. DAC outputs employ on-chip
precision output amplifiers that swing Rail-to-Rail^®. The
MAX5722’s reference input accepts a voltage range
from 0 to V_DD. In power-down, the reference input is
high impedance, further reducing the system’s total
power consumption.
The 20MHz, 3-wire SPI™, QSPI™, MICROWIRE™, and
DSP-compatible serial interface save board space and
reduce the complexity of opto- and transformer-isolated
applications. The MAX5722 on-chip power-on reset
(POR) circuit resets the DAC outputs to zero and loads
the output with a 100kΩ resistor to ground. This pro-
vides additional safety for applications that drive valves
or other transducers that need to be off on power-up.
The MAX5722’s software-controlled power-down
reduces supply current to less than 0.3µA and provides
software-selectable output loads (1kΩ, 100kΩ, or high
impedance) while in power-down. The MAX5722 is
specified over the -40°C to +125°C automotive temper-
ature range.
Features
o Ultra-Low Power Consumption
112µA at V_DD = +3.6V
135µA at V_DD = +5.5V
o Wide +2.7V to +5.5V Single-Supply Range
o 8-Pin µMAX Package
o 0.3µA Power-Down Current
o Guaranteed 12-Bit Monotonicity (±1LSB DNL)
o Safe Power-Up Reset to Zero Volts at DAC Output
o Three Software-Selectable Power-Down
Impedances (100kΩ, 1kΩ, Hi-Z)
o Fast 20MHz, 3-Wire SPI, QSPI, and MICROWIRE-
Compatible Serial Interface
o Rail-to-Rail Output Buffer Amplifiers
o Schmitt-Triggered Logic Inputs for Direct
Interfacing to Optocouplers
o Wide -40°C to +125°C Operating Temperature
Range
Applications
Automatic Tuning
Gain and Offset Adjustment
Power Amplifier Control
Process Control I/O Boards
Battery-Powered Instruments
VCO Control
PART
MAX5722EUA
MAX5722AUA
TOP VIEW
Ordering Information
TEMP RANGE
-40°C to +85°C
-40°C to +125°C
PIN-PACKAGE
8 µMAX
8 µMAX
Pin Configuration
Functional Diagram appears at end of data sheet.
Rail-to-Rail is a registered trademark of Nippon Motorola, Inc.
SPI and QSPI are trademarks of Motorola, Inc.
MICROWIRE is a trademark of National Semiconductor, Corp.
V_DD 1
GND 2
CS 3
SCLK 4
MAX5722
8 OUTB
7 OUTA
6 REF
5 DIN
µMAX
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.