MAX5580_07 Datasheet, PDF (1/36 Pages) Maxim Integrated Products – Buffered, Fast-Settling, Quad, 12-/10-/8-Bit, Voltage-Output DACs

19-3164; Rev 3; 7/07
EVAALVUAAILTAIOBNLEKIT
Buffered, Fast-Settling, Quad,
12-/10-/8-Bit, Voltage-Output DACs
General Description
The MAX5580–MAX5585 quad, 12-/10-/8-bit, voltage-
output, digital-to-analog converters (DACs) offer
buffered outputs and a 3µs maximum settling time at the
12-bit level. The DACs operate from a +2.7V to +5.25V
analog supply and a separate +1.8V to +5.25V digital
supply. The 20MHz, 3-wire, serial interface is compati-
ble with SPI™, QSPI™, MICROWIRE™, and digital sig-
nal processor (DSP) protocol applications. Multiple
devices can share a common serial interface in direct-
access or daisy-chained configuration. The MAX5580–
MAX5585 provide two multifunctional, user-programma-
ble, digital I/O ports. The externally selectable power-up
states of the DAC outputs are either zero scale, mid-
scale, or full scale. Software-selectable FAST and SLOW
settling modes decrease settling time in FAST mode, or
reduce supply current in SLOW mode.
The MAX5580/MAX5581 are 12-bit DACs, the
MAX5582/MAX5583 are 10-bit DACs, and the
MAX5584/MAX5585 are 8-bit DACs. The MAX5580/
MAX5582/MAX5584 provide unity-gain-configured out-
put buffers, while the MAX5581/MAX5583/MAX5585
provide force-sense-configured output buffers. The
MAX5580–MAX5585 operate over the extended -40°C
to +85°C temperature range and are available in
space-saving, 5mm x 5mm x 0.8mm, 20-pin, thin QFN
and TSSOP packages.
Applications
Portable Instrumentation
Automatic Test Equipment (ATE)
Digital Offset and Gain Adjustment
Automatic Tuning
Programmable Voltage and Current Sources
Programmable Attenuators
Industrial Process Controls
Motion Control
Microprocessor (µP)-Controlled Systems
Power Amplifier Control
Fast Parallel-DAC to Serial-DAC Upgrades
Pin Configurations appear at end of data sheet.
SPI/QSPI are trademarks of Motorola, Inc.
MICROWIRE is a trademark of National Semiconductor Corp.
Features
♦ 3µs (max) 12-Bit Settling Time to 0.5 LSB
♦ Quad, 12-/10-/8-Bit Serial DACs in TSSOP and
Thin QFN (5mm x 5mm x 0.8mm) Packages
♦ ±1 LSB (max) INL and DNL at 12-Bit Resolution
♦ Two User-Programmable Digital I/O Ports
♦ Single +2.7V to +5.25V Analog Supply
♦ +1.8V to AV_DD Digital Supply
♦ 20MHz, 3-Wire, SPI-/QSPI-/MICROWIRE-/DSP-
Compatible Serial Interface
♦ Glitch-Free Outputs Power Up to Zero Scale,
Midscale, or Full Scale Controlled by PU Pin
♦ Unity-Gain or Force-Sense-Configured
Output Buffers
Ordering Information
PART
TEMP RANGE
MAX5580AEUP
MAX5580AETP
-40°C to +85°C
-40°C to +85°C
*EP = Exposed paddle.
PIN-PACKAGE
20 TSSOP-EP*
20 Thin QFN-EP*
Ordering Information continued at end of data sheet.
Selector Guide
PART
MAX5580AEUP
MAX5580AETP
MAX5580BEUP
MAX5580BETP
MAX5581AEUP
MAX5581AETP
MAX5581BEUP
MAX5581BETP
MAX5582EUP
MAX5582ETP
MAX5583EUP
MAX5583ETP
MAX5584EUP
MAX5584ETP
MAX5585EUP
MAX5585ETP
OUTPUT BUFFER RESOLUTION
CONFIGURATION
(BITS)
Unity gain
12
Unity gain
12
Unity gain
12
Unity gain
12
Force sense
12
Force sense
12
Force sense
12
Force sense
12
Unity gain
10
Unity gain
10
Force sense
10
Force sense
10
Unity gain
8
Unity gain
8
Force sense
8
Force sense
8
INL
(LSB
max)
±1
±1
±4
±4
±1
±1
±4
±4
±1
±1
±1
±1
±0.5
±0.5
±0.5
±0.5
________________________________________________________________ Maxim Integrated Products 1
For pricing delivery, and ordering information please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.