MAX5441_09 Datasheet, PDF (1/12 Pages) Maxim Integrated Products – +3V/+5V, Serial-Input, Voltage-Output, 16-Bit DACs

19-1846; Rev 3; 1/09
EVAALVUAAILTAIOBNLEKIT
+3V/+5V, Serial-Input,
Voltage-Output, 16-Bit DACs
General Description
The MAX5441–MAX5444 are serial-input, voltage-out-
put, 16-bit digital-to-analog converters (DACs) in tiny
µMAX^® packages, 50% smaller than comparable DACs
in 8-pin SOs. They operate from low +3V (MAX5443/
MAX5444) or +5V (MAX5441/MAX5442) single sup-
plies. They provide 16-bit performance (±2LSB INL and
±1LSB DNL) over temperature without any adjustments.
Unbuffered DAC outputs result in a low supply current
of 120µA and a low offset error of 2LSB.
The DAC output ranges from 0 to V_REF. For bipolar
operation, matched scaling resistors are provided in
the MAX5442/MAX5444 for use with an external preci-
sion op amp (such as the MAX400), generating a
±V_REF output swing.
A 16-bit serial word is used to load data into the DAC
latch. The 25MHz, 3-wire serial interface is compatible
with SPI/QSPI™/MICROWIRE, and can interface directly
with optocouplers for applications requiring isolation. A
power-on reset circuit clears the DAC output to code 0
(MAX5441/MAX5443) or code 32768 (MAX5442
/MAX5444) when power is initially applied.
A logic low on CLR asynchronously clears the DAC out-
put to code 0 (MAX5441/MAX5443) or code 32768
(MAX5442/MAX5444) independent of the serial interface.
The MAX5441/MAX5443 are available in 8-pin µMAX
packages. The MAX5442/MAX5444 are available in 10-
pin µMAX packages.
Applications
High-Resolution Offset and Gain Adjustment
Industrial Process Control
Automated Test Equipment
Data-Acquisition Systems
Features
o Ultra-Small 3mm x 5mm 8-Pin µMAX Package
o Low 120µA Supply Current
o Fast 1µs Settling Time
o 25MHz SPI/QSPI/MICROWIRE-Compatible Serial
Interface
o V_REF Range Extends to V_DD
o +5V (MAX5441/MAX5442) or +3V
(MAX5443/MAX5444) Single-Supply Operation
o Full 16-Bit Performance Without Adjustments
o Unbuffered Voltage Output Directly Drives
60kΩ Loads
o Power-On Reset Circuit Clears DAC Output to
Code 0 (MAX5441/MAX5443) or Code 32768
(MAX5442/MAX5444)
o Schmitt-Trigger Inputs for Direct Optocoupler
Interface
o Asynchronous CLR
Pin Configurations
TOP VIEW
+
REF 1
CS 2
SCLK 3
DIN 4
MAX5441
MAX5443
8 GND
7 ^VDD
6 OUT
5 CLR
REF 1
CS 2
SCLK 3
DIN 4
CLR 5
+
MAX5442
MAX5444
10 GND
9 V_DD
8 RFB
7 INV
6 OUT
µMAX-8
µMAX-10
Functional Diagrams appear at end of data sheet.
Ordering Information
PART
TEMP RANGE
PIN-PACKAGE
INL (LSB)
SUPPLY (V)
MAX5441ACUA+
0°C to +70°C
8 µMAX
±2
5
MAX5441AEUA+
-40°C to +85°C
8 µMAX
±2
5
MAX5441BCUA+
0°C to +70°C
8 µMAX
±4
5
MAX5441BEUA+
-40°C to +85°C
8 µMAX
±4
5
MAX5442ACUB+
0°C to +70°C
10 µMAX
±2
5
MAX5442AEUB+
-40°C to +85°C
10 µMAX
±2
5
MAX5442BCUB+
0°C to +70°C
10 µMAX
±4
5
MAX5442BEUB+
-40°C to +85°C
10 µMAX
±4
5
µMAX is a registered trademark of Maxim Integrated Products, Inc. +Denotes a lead(Pb)-free/RoHS-compliant package.
QSPI is a trademark of Motorola, Inc.
Note: For leaded version, contact factory.
MICROWIRE is a registered trademark of National Semiconductor Corp. _{Ordering Information continued at end of data sheet.}
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.